Seisco RA-28 Control Board

GRowe · 12-24-2010, 09:20 AM

This board has blown triacs and what appears to be caps. But when googling the part number I'm not getting an accurate part description or replacement suggestion. The markings read ( VRM .01k630v ). There are 4 on the board, next to the triacs, 2 are blown. I have found the triacs and ordered them but the blue caps or voltage regulators have me stumped . If any body can help with identifcation and suggest replacement parts my sister an brother an law would be grateful ( showers in 60 degree water is no fun from what I here ). Thanks ahead of time for any help.

ReverendJones · 12-25-2010, 07:07 PM

.01uf
10% tolerance
630 volt
A pic would help but they sound like this: http://search.digikey.com/scripts/Dk...me=490-4822-ND

12-24-2010, 09:20 AM	#1
GRowe New Member Join Date: Dec 2010 Posts: 1	Seisco RA-28 Control Board This board has blown triacs and what appears to be caps. But when googling the part number I'm not getting an accurate part description or replacement suggestion. The markings read ( VRM .01k630v ). There are 4 on the board, next to the triacs, 2 are blown. I have found the triacs and ordered them but the blue caps or voltage regulators have me stumped . If any body can help with identifcation and suggest replacement parts my sister an brother an law would be grateful ( showers in 60 degree water is no fun from what I here ). Thanks ahead of time for any help. Last edited by GRowe; 12-24-2010 at 09:24 AM..

12-25-2010, 07:07 PM	#2
ReverendJones Resurgam Join Date: May 2010 Posts: 19	Re: Seisco RA-28 Control Board .01uf 10% tolerance 630 volt A pic would help but they sound like this: http://search.digikey.com/scripts/Dk...me=490-4822-ND

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode