Latest recap 7300GS

Koda · 11-26-2011, 09:50 AM

I got this 7300GS with blown sacons. 3x1500uf 6.3v and 1x1000 6.3v, also replaced a 470uf one which wasn't bad just in case. Had no good quality caps so I decided to recap it with 3x1500uf yageos, 1x1000uf jackcon and the 470uf is a KMG. This recap was only to see if it will work at all after recap. The card ran fine after the recap but I only tested it for about 10 minutes, didn't want to mess things up. My thoughts are... my motherboard is ASUS m4n78 SE with all solid caps, will these caps filter enough of the ripple so the card would run fine with these crap caps? Not that I would run it in this system, I have a gt 220 in it, just wondering. Here are some before and afters

DSC00592.JPG

DSC00589.JPG

DSC00588.JPG

DSC00587.JPG

DSC00606.JPG

DSC00607.JPG

Sorry for the poor quality

11-26-2011, 09:50 AM	#1
Koda Badcaps Veteran Join Date: Aug 2011 City & State: Prilep My Country: Macedonia Line Voltage: 220v AC I'm a: Professional Tech Posts: 267	Latest recap 7300GS I got this 7300GS with blown sacons. 3x1500uf 6.3v and 1x1000 6.3v, also replaced a 470uf one which wasn't bad just in case. Had no good quality caps so I decided to recap it with 3x1500uf yageos, 1x1000uf jackcon and the 470uf is a KMG. This recap was only to see if it will work at all after recap. The card ran fine after the recap but I only tested it for about 10 minutes, didn't want to mess things up. My thoughts are... my motherboard is ASUS m4n78 SE with all solid caps, will these caps filter enough of the ripple so the card would run fine with these crap caps? Not that I would run it in this system, I have a gt 220 in it, just wondering. Here are some before and afters DSC00592.JPG DSC00589.JPG DSC00588.JPG DSC00587.JPG DSC00606.JPG DSC00607.JPG Sorry for the poor quality __________________ Guns don't solve problems. I'll take 12

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode