|
|
|
|||||||
|
|
Thread Tools | Display Modes |
01-12-2012, 10:35 PM
|
#1 |
|
Badcaps Veteran
Join Date: Feb 2011
City & State: Canterbury
My Country: New Zealand
Line Voltage: 230VAC 50Hz
I'm a: Forum Junkie
Posts: 451
|
High Power HPC-420-102 DF
My friends Computer while checking all the voltages I found the 5 Standby to be at 5.64v loaded when I unplugged it from the main board it reads just over six volts
 My question is should I recap it. I'm guessing bad caps is what is wrong with it.
__________________
My pc CPU : AMD PHENOM II x4 @ 3.5Ghz MB : ASUS M4A89TD PRO USB3 RAM : Kingston ValueRAM 16gb DDR3 PSU : Cooler Master 850W Silent Pro GPU : ATI Radeon HD 6850 |
|
|
|
01-13-2012, 12:09 AM
|
#2 | |
|
Badcaps Veteran
Join Date: Apr 2010
City & State: Canada
Posts: 8,173
|
Re: High Power HPC-420-102 DF
Quote:
Also stop using the computer immediately otherwise you may fry the motherboard.
__________________
--- begin sig file --- If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post. We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings. Please do not post inline and offsite as they slow down the loading of pages. --- end sig file --- |
|
|
|
|
|
01-13-2012, 12:41 AM
|
#3 |
|
Badcaps Veteran
Join Date: Feb 2011
City & State: Canterbury
My Country: New Zealand
Line Voltage: 230VAC 50Hz
I'm a: Forum Junkie
Posts: 451
|
Re: High Power HPC-420-102 DF
yes the power supply.
Not been in use since I confirmed voltage been to be high. Checked for bloated cap none found, I don't own a esr meter. Anyway he has purchased a new power supply. |
|
|
|
|
01-25-2012, 01:08 AM
|
#4 |
|
Badcaps Veteran
Join Date: Feb 2011
City & State: Canterbury
My Country: New Zealand
Line Voltage: 230VAC 50Hz
I'm a: Forum Junkie
Posts: 451
|
Re: High Power HPC-420-102 DF
Replaced the 3 of the caps in the 5vstb.
Voltage is normal (5.1v) now but the power supply won't run it just gives one pulse. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
