I think i found some caps

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Shimen
    Member
    • Jul 2007
    • 16
    #1

    I think i found some caps

    Hi guys I promised some pics of my MOBO. So here they are. I put the bad cap back into my comp and put the basics in it so i can post pics and do my order from my home. The ones in the board are 1200uf 6.3v choyo caps a total of 10 of them. the ones i want to get are nichicon 1500uf 6.3v. part # UPW0J152MPD
    Everything is same except for UF value but was told i can bump that up a little and it will not affect anything. Nichicon makes another #UPM0J122MPD but there is a 91 day lead time on it and also a minimum order of 200 it matches exactly but i dont need that many. So what are your guys thoughts. I want to order them today so if you have time give a shout back thanks.


    Last edited by Shimen; 07-20-2007, 06:36 AM. Reason: WHOOPS PICS!!
    Tags: None
    • Shimen
      Member
      • Jul 2007
      • 16
      #2
      Re: I think i found some caps

      Oh looking around on Mouser.com i found something else Nichicon makes a 6.3v 1200uf in the PW series specs.
      UPW0J122MPD6 : 1200uf : 0.068Impedence : 1050ripple mA rms: 10D x 16L compared to the one i mentioned in the first post
      UPW0J152MPD : 1500uf : 0.052Impedence : 1220ripple mA rms : 10D x 20L
      The 1200uf is 3mm shorter than the ones i have on the board. Lead spacing is same on both. Just thought i would through a bit more info at you guys.

        Comment

        • PeteS in CA
          Badcaps Legend
          • Aug 2005
          • 3578
          • USA, Unsure of Planet
          #3
          Re: I think i found some caps

          The PW series is a better series than the PM series. Look into Digi-Key. They carry Nichicon, Panasonic and United Chemicon (UCC). Specifically, I suggest looking at the Panasonic FM series and UCC's KZE series in that order of preference. D-K carries the PWs, but I think FM or KZE will be more suitable for a MB application.
          PeteS in CA

          Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
          ****************************
          To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
          ****************************

            Comment

            • Shimen
              Member
              • Jul 2007
              • 16
              #4
              Re: I think i found some caps

              Alright i took your advice and ordered the Panasonic FM Series Caps. 15 in total. And i should be getting them around tues. Thanks for your help man.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • DrewPhillips
                  Capacitor Diarrhea - Nichicon PL Series
                  by DrewPhillips
                  Hello All, I have on the bench a couple of PSU's which have some failed Nichicon PL series caps. They didn't "puke" their guts through the top, but instead "diarrhea'ed" corrosive brown electrolyte through the bottom, down the legs and onto the board. On one cap, the electrolyte rotted the cap right off the board leaving 2 little stubs, and also corroded a trace on the foil side.

                  The PSU's are Power-One MAP series and are ringing-choke topology. The semiconductors have date codes in 1993. The PSU's were used in a commercial application, fan-cooled. They had failed...
                  03-02-2025, 10:18 PM
                • nick3092
                  Mid/late 80's Nichicon Yellow Caps
                  by nick3092
                  I recently acquired a set of Bose Roomate speakers from the mid to late 80's. Basically the right speaker cabinet is completely passive, and the left one has the power transformer and amplifier circuit in it. Out of curiosity, I opened it up to see what the circuit looked like. Looks like they used all Nichicon VX (2x 4700uF/16v for smoothing off the bridge rectifier), a couple random Nichicon SE series sprinkled on the board, and what really caught my eye - 2 yellow sleeved Nichicon caps (both 1uF/50v with no real series marking. Below are pictures of the caps. The only thing not shown in these...
                  08-28-2022, 03:56 PM
                • chth96
                  Is there datasheet for nichicon LXJ series?
                  by chth96
                  I want to calculate capacitor ESR referring to below guide.

                  https://forum.digikey.com/t/calculat...-from-tan/2633


                  I must find out dissipation factor(Tan(δ)) for nichicon lxj series(6.3v 1500uf,25v 1000uf ,10v 2200uf)
                  I finally found out datasheet which has all series of nichicon capacitor.But unfortunately, It removed old nichicon capacitor.
                  Is there anyone who still has old nichicon datasheet which has information of LXJ series?
                  11-20-2022, 08:11 AM
                • chth96
                  Is there any datasheet for nichicon RT(M) series?
                  by chth96
                  A few days ago,I destroyed one of my japanese retro game console by pluging it to 220v outlet.
                  https://www.badcaps.net/forum/troubl...e-been-blew-up

                  and I finally fixed​ this retro game console by soldering varistor and glass fuse.

                  But I noticed that When I measure voltage of PSU's 5pin connector, it is 8.80-9.07v, 5.13v,3.40-3.48v,GND,GND instead of its rated voltage of 9v 5v 3v GND GND.
                  I have spare console...
                  11-28-2023, 03:36 AM
                • spiros.p
                  EV dsp,replace the nippons lxz with nichicon fw ?
                  by spiros.p
                  Hi guys.I have two EV dsp processors and before two years i do full recap to both. The units have before recup thousands hours running.On output input coupling caps (16 pieces) i solder nippon lxz series 100mf 63v (this time i don't have other stock) i know is low esr caps.Last week have found and order nichicon fw standard audio series.Is a good reason to replace the nippons lxz with nichicon fw ? The units get better sound? Or get worse?Thanks for any advice.
                  12-19-2023, 12:26 AM
                • Loading...
                • No more items.
                Working...