Hello everyone. I'm new here, and I like the site! Anyway, I have a FIC SD11 mainboard. The mainboard looks ok, no bent, buldgey or leady capacitors. However it will not POST. When I turn it on, out of the case, on the mainboard box so it's not being short circuted by the case, with a know good CPU, known good memory, and known good video card, the fans spin, but no screen. I have a little PCI card that displays BIOS codes, and so I plugged that in, and it says ED and stays there forever. I looked the code up in the booklet and it means that it says "Init floppy" I thought it odd, that the computer wouldn't post because of an unplugged floppy, so I cleared the BIOS, no effect. I plugged in a floppy, still no POST, but the error code changed to EF which means "Floppy read error". Cleared the BIOS again, no effect.
So now I'm stumped. Why would the BIOS try to read the floppy, unless its looking for a BIOS ROM or something?!?
BTW: The CPU gets unusually hot for only 5 minutes of on time, but it is a Slot A with no fan, just a giant heatsink. I also tried a known good ISA card, but still no vid and same codes.
so... I am sad, that it doesn't work.
So now I'm stumped. Why would the BIOS try to read the floppy, unless its looking for a BIOS ROM or something?!?
BTW: The CPU gets unusually hot for only 5 minutes of on time, but it is a Slot A with no fan, just a giant heatsink. I also tried a known good ISA card, but still no vid and same codes.
so... I am sad, that it doesn't work.
Comment