The (now the death of) Dolby DP600 Build (BEYOND COOL BUT PIC HEAVY)

[Topcat]

Another little finishing touch.....labels for the controls & lights. This isn't realy how I wanted to do it; the original plan was vinyls with my wife's cricut.....but that wasn't working at all with letters so small....so I ended up using the label maker. Yes, after a couple years, I know what everything is for.....but it just looked incomplete without some kind of labeling....so here it is.








Now you know what all the lights are for.....

[sam_sam_sam]

This is the most professional thing I have seen in very long time with put together parts and I can see from the hour meter that you use it quite a bit and if you have been following my ZD-987 switching power supply modifications

I personally think that you did a very good job and made it look very professional and very functional at the same time

I get some of inspiration from this post and what you have done here to solve a monitoring the computer system voltage and current and see if things are the way they should be of course my situation is a little bit different in the respect of I was having switching power supply failure after many hours of use and need a solution for this issue of mine because too buy another dual desoldering/soldering station is not cheap over $250.00 plus shipping and a month of waiting time unless I can find a seller in the USA which is not easy and more often than that it is more expensive than buying it from China