Badcaps - Explore our electronics repair forums

Collapse
 
  • Time
  • Answered
  • Show
  • New Topics
Clear All
new posts

  • HP 15-ec2531nd switching off

    Hi,

    I have an HP 15-ec2531nd here which does the following:
    - Turns on. One of both fans goes full throttle. Other doesn't spin up.
    - BIOS works.
    - All self tests pass, except smart pin. Not even with another adapter connected.
    - RAM is ok.
    - RAM slot pins are ok.
    - Battery is ok.

    Whenever I want to boot Windows from m2 SSD system switches off.
    I have a USB stick with several tools on it, including Windows PE. I can browse this stick's menu, but when I start Windows PE, the laptop switches off at the same point where it would...
    See more | Go to post

  • lenovo m920s bios request

    hi guys

    i've got a lenovo m920s 10sk s28m00 with a supervisor password set in bios

    s/n: s4kg1433

    i've tried several procedures, but i cant get rid of the pwd...

    i've made a dump with AFUWINx64.EXE

    can you help me?

    thx...
    See more | Go to post

  • MacBook Pro 16 M1 Pro Liquid Damage (820-02100)

    Got a MacBook Pro M1 Pro 16'' to rescue immediately after liquid accident - I got it in less than 30 minutes after the spill.
    It got spilled from behind when the laptop was closed. It mostly affected the rear of the mainboard and the bottom of the LCD.

    I quickly took it apart and washed the liquid residue off the mainboard.
    The area around the UP800 had some light corrosion, but it just washed away with some IPA. Other areas looked undamaged.

    The mainboard got a thorough cleaning, as did the top case and LCD connectors / cables.

    Now the laptop...
    See more | Go to post

  • Lenovo Thinkpad X1 Carbon Gen9 supervisor password

    Hello everyone,


    I'm new to the forum and looking forward to learning something new.
    I got a Lenovo Thinkpad X1 Carbon Gen9 (with intel CPU) on which the USBC ports were broken, these are now repaired, I have reinstalled the notebook with Win11 and actually everything works, but it has a bios supervisor password.

    is there any way to read out the password, or install a new bios? or any other methods?

    as I said, I am an absolute beginner and need to get an overview first




    Greetings to all...
    See more | Go to post

  • FUJITSU LIFEBOOK E559 SCHEMATICS

    Hi folks, I'm repairing a Fujitsu lifebook E559, but i couldn't get the schematics and the boardview file. Can someone help me please?
    Thanks, cheers
    See more | Go to post

  • ScApi
    started a topic Bios for HP 17-cn1003ca

    Bios for HP 17-cn1003ca

    Need bios dump file, corrupted after update.
    17-cn1003ca
    S/n:5cg1516P3S...
    See more | Go to post

  • Samsung QE50Q60AAUXXH turns off as soon as backlight turns on

    Plugging the power in will turn on the backlight after about 5 seconds and then immediately shuts down.

    If I unplug either of the two cables with the yellow outline in the picture the backlight stays on and the startup sound plays but no image. Any ideas how to proceed with this please?



    ...
    See more | Go to post

  • 4G comm
    started a topic hp 14s-dq5015nia bios needed

    hp 14s-dq5015nia bios needed

    the laptops draws 0.400 to 0.900 milliamperes
    the processors warms correctly
    the fan spin normally
    the screen flickers but no display
    attached is the original dump

    hp 14s-dq5015nia
    MODEL; OPAN DA0PANMB8F0 REV F
    SN;5CD249369M
    PRODID;6G5L2EA#BH5...
    See more | Go to post

  • MS-16R61 Rev 2.0 EC not responding after repacement

    Hello adventurers

    I have this board and it came from a friend with a shorted EC.
    I have ordered a new one and replaced it.
    Now i have 4 Milliamps draw on pluging
    3VALW and 5VALW present (i know nothing about RSMRST and ECRST because web only has boardview for 16r3 and this modell looks competly different)
    For EC flash i need KSO3 KSI4 KSI7 KSI6 KSI5. These are all 3.3v EXCEPT KSO3 is 2.2V
    I have checked the FFC cable connections and they are OK.
    I have removed and Reballed the IC again, but no change.
    Do you have idea why EC not responding...
    See more | Go to post
No content found
Show More
 
  • Time
  • Show
  • New Topics
Clear All
new posts
Please log in to your account to view your subscribed posts.

What's Going On

Collapse

There are currently 558861 users online. 5085 members and 553776 guests.

Most users ever online was 1,342,976 at 10:51 PM on 04-26-2024.

Badcaps Statistics

Collapse

Topics: 221,591   Posts: 1,513,465   Members: 591,534   Active Members: 20,761
Welcome to our newest member, mamer24.

Forums

Collapse

Top Active Users

Collapse

Today's Birthdays

Collapse

Latest Topics from Friends

Collapse

There are no results that meet this criteria.

Working...