RC Unlocker 2.0 (enhanced by RefixGURU & SKB)

[arshad.jackie]

RC Unlocker 2.0 (enhanced by RefixGURU & SKB)

Its completely FREE for lifetime. Its obsfucated with Pyarmor for preventing misuse.

All existing features of RC Unlocker 1.0

Now we added support for HP EC BIOS 32MB UNLOCKING

All thanks you RethoricalCheese for this amazing tools....

[Zilicon]

Greetings everyone, please I need help with the above Bluetooth module.

I was fixing a Bluetooth speaker that was dead, no sign of life. On checking, i didscovered the bluetooth chip ATS2835P got hot.

I bought a new ATS2835P, the bluetooth flashes red light faintly continuously.

Does this chip requires programming before it can work?...

[Prabuth]

darr3amb6d0 rev d Schematic Need Please..
NEC Laptop
VK26TX-M...

[Proxmox]

I need the ITE EC SPI programmer Tool to program the EC of my Asus K72JR.Can someone help me?

[Naineesh1]

I just recieved a working laptop for a quick dc port swap, i tested the laptop on battery it worked, tested dc port issue felt loose, so disassembled the laptop and removed battery connector, swapped the dc port, re-connected the battery connector, inserted dc pin, white led glowed up - stable, pressed power switch, but it didn't turn on, no fan spin and no display. just 1 white led that glows up, doesn't move to orange (charging), i check voltage (battery : 11.37v) (dc input port : 19.3v)(bios : 1.75), i am stumped, there is no shorting on board.

Schematic diagram : bios chip volt...

[Banagus33]

Hi!
I have BIOS locked by admin password in laptop Dell Latitude 5300. I already disasembled laptop and i can't find BIOS chip. Can someone help? I attached motherboard pictures....

[Alleycat86]

Hello looking for a schematic, boardview, for a board GA-RX7PXE4 REV: 1.2. A laptop gigabyte aorus 17 xe4. A part has burned down, please help us identify it. Photo attached

[GabrielT_03]

Please, someone who can help me with a PROBOOK 450 G1. When I connect the charger or power supply, the power jack LED starts blinking. The board has the main voltages: 19V, 3V, 5V, and 3V, and the power button.
The board turns on.
This is the board model: Rampage_MB 12241-1

[leszekp]

Hi .I'm looking a correct pins to connect via isp in EL.MT9216-FG48 chassis .I'm trying to connect with Z3X and UFPI with pins from simmilar chassis , but D0 not correct . I don't want to brake this chassis .Anyone help me with correct pins ?