BoardView Asus Zenbook UX425UG UX425UQ UX425UG NB2567 PCB MB V4

[ICRMIIX]

BoardView Asus Zenbook UX425UG UX425UQ UX425UG NB2567 PCB MB V4...

[Higgpv]

Hello dear friends The BIOS of Fujitsu e752 laptop has a problem The motherboard model is cp562716-x3 and I can't find its BIOS file I would be grateful if you could send me the file

[arya fikri]

NEED bios lenovo ideapad flex 5 C570-14A 213112-1...

[Deserves]

helppp

[Deserves]

pleasee help

[DAMIGO]

Please share the schematic or boardview files for this Mainbord. Got a fried chip/device on the mainboard, and would like to fix it, and check the other both near the fried chip too.
I need to know the model and type of this fried device. Its maybe an capacitor, but am not sure.

Thank you very much!...

[santoslao]

Hello friends anyone help me to unlock pwd for this?
Enter BIOS but you can not change anything!
Model: VAIO FE14 (VJFE49F11X)
Motherboard: EM AB528 V3.0
SN: 89559945E
...

[howardc64]

Eventually discovered a burn mark near lower corner of LCD. Here is a summary

• Backlight on, no image
• Disconnect right buffer board (view from front), left side display comes on
• Masked off pin 7+8 (both ~12,5v on both left and right buffer board) from t-con to right buffer board (view from front) display works but have some lines
• Buffer board is pretty simple

Removed the front bezel to examine edge of the glass. Found burn mark on lower right (view from front). Plastic bezel covering the burn mark region shows heat signature on the inside surface facing the LCD panel. Last 2 pics. Bright...

[66Ton99]

Hi,
I have a problem with my Gigabyte Z790 Aorus Master, it doesn't run now.


Looks like I damaged some elements

But I do not know what's there.
Please help....

[silver60618]

Hi all, Im working on a board, that my customer brought to another shop, and smeared liquid metal all over the board.
The laptop powers on, then shuts off. I noticed traces of Liquid Metal near the edge of the CPU, but I fear some maybe underneath.

Has anyone ever tried Ultrasonic cleaning, or compressed air to remove or agitate the liquid metal?