the laptops draws 0.400 to 0.900 milliamperes
the processors warms correctly
the fan spin normally
the screen flickers but no display
attached is the original dump
hp 14s-dq5015nia
MODEL; OPAN DA0PANMB8F0 REV F
SN;5CD249369M
PRODID;6G5L2EA#BH5...
Badcaps - Explore our electronics repair forums
Collapse
Collapse
-
hp 14s-dq5015nia bios needed
-
MS-16R61 Rev 2.0 EC not responding after repacement
Hello adventurers
I have this board and it came from a friend with a shorted EC.
I have ordered a new one and replaced it.
Now i have 4 Milliamps draw on pluging
3VALW and 5VALW present (i know nothing about RSMRST and ECRST because web only has boardview for 16r3 and this modell looks competly different)
For EC flash i need KSO3 KSI4 KSI7 KSI6 KSI5. These are all 3.3v EXCEPT KSO3 is 2.2V
I have checked the FFC cable connections and they are OK.
I have removed and Reballed the IC again, but no change.
Do you have idea why EC not responding... -
Board Layout of iPad Pro 10.5 (Model : A1709)
Good day, everyone! Can anyone please share a board layout (complete with components, test points, etc.) of iPad Pro 10.5 (Model : A1709)? There is already a schematic diagram of iPad Pro 10.5 here but somehow it lacks the complete board layout. I need to know where the specific Test Points (TP) are on the motherboard. I hope someone can help me. -
ASUS ROG STRIX Z370-F GAMING "USB OVERCURRENT STATUS DITECTED " SOLUTION PLS
I have ASUS ROG STRIX Z370 motherboard. it sometimes loading windows and sometimes showing usb overcurrent message ...all usb ports are working ... pls give a soluion ... all usb ports has 5V fuses are all good... -
Help repair Panasonic fridge not cooling
Hi all forum members,
Few days ago, i might have forgotten to close my home fridge freezer door completely. The next day, the ice cubes and frozen meat almost melted halfway and the freezer doesn't feel cool. I shut it off, wipe dry and let it air dry for one whole day. The next day i switched on the fridge, the compressor run for a second and it shuts off(no vibration and no sound at all) only the internal freezer compartment fan is running but is not cooling even i switched on a full day.
After shut off, i dismantle the rear water pan holder and reached to the compressor wiring.... -
Clevo PC70DP issues
Hi all
I have one of those machines. Clevo PC70DP.
Machine starts, but turns off quite quick. Just before turning off one can hear fans are spinning at high speed. Can be turned back on again right away.
So, feels like overheat problem.
I cleaned up fans and heatsinks and replaced thermal paste. I can now see CPU runs cooler and machine stays on for longer, but still same.
Few more findings:
1. on-board NVIDIA card is not found. Not showing up in Windows or in BIOS.
2. I tried to run CPU stress test. CPU stays at about 65 degrees. Works... -
Any helpful Apple Airpods Max repair tutorials?
Hi all,
title says it all. I have Airpods Max which no charing light. Reset lights show up when i connect a USB charger and push the buttons but not loading or bluetooth reaction. USB meter shows 5v, 0,6a and 1,8-3,2w (differs on used charger).
The videos i found about repairs are more something like a try and error with changing parts or battery replacement but no direct fault analysis.
So maybe anybody here has experience in repairs or can help me to locate the problem? My stomach tells me that i need a new battery but 50€ for a feeling is too much. -
EC dump request – Dell Latitude 5420, GDF40 LA-K491P Rev 3.0, MEC5107-LJ
Hello everyone,
I need the EC firmware dump for Dell Latitude 5420, motherboard GDF40 LA-K491P Rev 3.0 (A02).
The embedded controller is MEC5107-LJ (UE1).
The EC flash chip is W25Q80DV, 8Mbit (1MB).
I already have the 32MB BIOS dump (W25Q256JV), but my system is still not powering on — just amber blink. I suspect the EC firmware is missing or corrupted.
If anyone has this board and can share their EC dump from the 25Q80DV, I’d be very grateful.
Thank you in advance!... -
DAN14CMB6E0 REV E schematic
good morning, I have an hp all in one 22-df with a DAN14CMB6E0 REV E motherboard
Could any expert help me with the schematic?
thanks a lot.
Keep learning.
No content found
Show More
Please log in to your account to view your subscribed posts.
What's Going On
Collapse
There are currently 617606 users online. 5052 members and 612554 guests.
Most users ever online was 1,342,976 at 10:51 PM on 04-26-2024.
Badcaps Statistics
Collapse
Topics: 221,582
Posts: 1,513,411
Members: 591,534
Active Members: 20,761
Welcome to our newest member, servo101.
Forums
Collapse
Top Active Users
Collapse
- eccerr0r (8,695 posts)
- jackx (208 posts)
- treader (6 posts)
- welectronic (2 posts)
- pateran (1 posts)
- Cristiano Machado (1 posts)
- aureus19 (0 posts)
Today's Birthdays
Collapse
Latest Topics from Friends
Collapse
There are no results that meet this criteria.