Epson M3170 Monochrome inkjet printer adjustment program tool

[shamsudeen]

Epson M3170 Monochrome inkjet printer adjustment program tool.
Hi, i want to reset a epson reset program tool needed to reset the EPSON M3170 PRINTER's Maintenance box,
anyone having it, please share
Thank you

[amats1]

please help.. can anyone can unlock or reset my bin file of dell optiplex7010 tia....

[guzq]

Hi Guys,

This Mac come with dead issues (severe water damage), now it’s turning ON except Trackpad and Keyboard not working.

Already check and write down DM for JT400 and JT201 don’t find any abnormal value (I don’t have unit for compare).

Already try,

• Replacing Trackpad Flex Cable
• Replacing New Trackpad
• Replacing Little Board (Daughter Board)
• Try using New Keyboard

Still no change at all, Trackpad and Keyboard not working.

So I check “Power Load Switches” and this is all the numbers,
UC830 > 1 = 3.297V ; 3 =1.757V ; 4 = 3.798V...

[winbond]

hello
please fix . corrupt bios
lenovo loq 15arp9
sn /mp2nnff8
board number/ la-n591p...

[jodans]

Please does anyone has schematic and boardview for Chromia-6050A2930001-MB-A01 (A1) really badly needed. Thank you

[peste]

LA-L931P

...

[woji]

Hello, can I ask for help with my problem? I have an HP EliteBook 840 G1 laptop and I have this problem - when I turn on the laptop, it usually starts up to 5-6 times ... the keyboard, power button, LEDs always light up, the fan spins and after 1 second the laptop turns off. After several attempts, the laptop turns on and starts to start, but then CapsLock and NumLock start flashing - 3 times and the fan spins at full speed. According to the manual, this is a RAM error - but I have already tried about 10 working modules and always the same error. Has anyone solved a similar or the same problem?...

[Andreasbest]

Hello!
Today i received a Legion 5 pro with motherboard NM-D562 that suffered water damage, no power at all, no led, no fans, nothing.
I measure 20v on PQ5401 at pins 5, 6, 7 and 8 but 0v at 1, 2, 3 and 4.
Is this normal?
Thanks in advance!

Schematics and boardview-> https://www.badcaps.net/forum/troubl...95#post3254995...