Mac mini M4 (A3238) Ripped Chip - Schematics+BoardView Needed

[ee91137]

Hi,

I'm looking for assistance with a Mac mini (M4, 2024), model A3238 (Model MCYT4LL/A), which I recently purchased. The front USB-C ports are not providing power.

Upon inspection, I've identified that a chip and an adjacent capacitor have been physically ripped off the logic board near the SSD connector.

Could anyone provide information on the specifications of this missing chip? Additionally, I would greatly appreciate it if anyone has access to the schematics and board view for the Mac mini A3238 logic board.

Thanks for your help!
...

[fuzzy4]

Hi all,

I have this electric tin opener and the part that moves the can round (1st picture), doesn't move, I can hear the motor turning, but no movement, there's something rattling inside, so presume a piece of plastic has broken, or come loose.

Took the bottom plate off, but left with this (3rd picture), any ideas how to get inside?

Thanks....

[newmemberguys]

Hi everyone,

I'm looking for the schematic and boardview files for an ASUS Zenbook S16, model UM5606WA (2024).

The reason I’m asking is that I recently caused some physical damage while trying to clip the BIOS chip with a CH341A programmer and SOIC8 clip. Specifically, I knocked off some components (possibly 6, though I’m not 100% certain as I don’t have much experience with this) around the bios chip as you can see in the photos attached. I was able to recover 3 of them which are now taped on the battery.

To help with identification, here is the full...

[esteban_1978]

Buen dia con todos alguien que me ayude con el diagrama esquemático o el boardviewe de la placa de una hp GPT50 LA-J496P gracias

[willyboy 3]

i have hp 13- s128nr mb with physical damage need bord view file to find traces

[kalilinux25]

DEVICE: Laptop
Model: lenovo thiinkpad t410
Board Id: 09A33-3 48.4FZ09.031
NZM1H-8
ISSUE: NO POWER

From the first mosfet 20v is not passing through, pin 4 has 19.5v and the first mosfet is a P-CHANNEL mosfet (SI7121DN) i think the pin 4 should be lower to active the 1st mosfet to allow the 20v to pass to second mosfet ive check all for shorting in the board , i did;nt find in rails, so ive check the schematic and im suspecting that, my Q61 is faulty due to its pin 1 is 0.47ohms? im not pretty sure, hope someone can help me figure out this issue.

...

[acshud]

hello.i put my tablet to charge after win update and now it's dead.i need bios,please.
motherboard LTM11
sn-WB15049832
model-20327
thx...

[Sector7]

Hello, I need the full .bin emmc dump of this TV. How can I find it? Thanks.

[G11NS]

Could somebody help me to clean my bios region??
Board Code : Asus X441MA Rev 2.1
Serial Number : KBN0CV15J241485
Thanks for help....!...

[bathline]

OMEN by HP 15-dh1003TX
is it even possible to erase bios passwords on such a new model?
im happy about any information which helps me making some progress....