DEVICE: Laptop
Model: lenovo thiinkpad t410
Board Id: 09A33-3 48.4FZ09.031
NZM1H-8
ISSUE: NO POWER
From the first mosfet 20v is not passing through, pin 4 has 19.5v and the first mosfet is a P-CHANNEL mosfet (SI7121DN) i think the pin 4 should be lower to active the 1st mosfet to allow the 20v to pass to second mosfet ive check all for shorting in the board , i did;nt find in rails, so ive check the schematic and im suspecting that, my Q61 is faulty due to its pin 1 is 0.47ohms? im not pretty sure, hope someone can help me figure out this issue.
OMEN by HP 15-dh1003TX
is it even possible to erase bios passwords on such a new model?
im happy about any information which helps me making some progress....
Good day, everyone. I have a Lenovo Flex5 Chrome 14IAU Enterprise enrollment lock. Please help me to remove it. Thank you
*LENOVO FLEX5 CHROME 14IAU
*SERIAL NUMBER: PF5BNBAF
*MB SERIAL: JC4C5/JC6S5 NM-E431 REV:2.0...