ASUS TUF GAMING Z790-PLUS WIFI - BIOS Help

[grimacelord]

Hello,

I have spent the last hour on this and I guess this is just over my head, so here I am.

I have an ASUS TUF GAMING Z790-PLUS WIFI motherboard here that needs to have the BIOS updated in order to accept the latest CPUs.

The BIOS chips seem to come as a set of two: GD25B64ESIG and GD25B128ESIG. My guess is one of them is a fail-safe for the main BIOS? I really don't know. Or one of them is ME and other is BIOS? I don't know.

Anyway, I took dumps of both chips and then downloaded the latest update for this motherboard from ASUS's website...

[Wilfried]

PLEASE THIS DELL INSPIRON 17 7000 HAVE BIOS PASSE WORD / 14202-1...

[Moxado]

Hello, my HP Pavilion Gaming 15-dk1013np (motherboard reference: GPC52 LA-J641P REV:1.0) is turning on, but there is no image, does anyone have the bios and ec file? Thanks...

[hvries76]

Hi,

Hope someone can help getting new BIOS files.
Laptop won't boot only showing rainbow keyboard. I got it running a few days ago and managed to get windows re-installed but next day it again didn't boot and no luck since.

Legion 7 16ithg6
MTM: 82K6000HGE
SN: PF3B4Q0E

Attached bios backup files 16+8mb...

[Mdink]

Hello, I need help me with schematic diagram for clevo w65j0 and part number 6-71-w65j0-d01.

[mon2]

This is a case study on a 'sudden death' A2141 unit brought in for service.

USB-C meter is @ 5v with ~0A current draw.

a) Disconnected battery. No power to the machine. Applied the Qianli Tail tester with the USB-C connector. Each USB-C power connector was green with the diode mode of testing. CD321x are not defective as originally thought.

b) PPBUS_g3h is not shorted but is a low voltage due to the low INPUT voltage of 5v being boosted. On a random power up attempt, PPBUS_g3h was at the expected 12v63 range AND input voltage was observed to be @ 20v for...

[ErParucca]

I have a thinkpad X390 that would work fine if not for a problem: sensor temp5 (battery as far as I know) shows variable values over 100° C. When it reaches higher temps (I guess 110° as I was able to list temperatures up to 109°) it simply powers off. All other sensors show 0° except for the CPU which seems to report correct temperatures.

In a wishful thinking I hoped replacing the battery (as far as I know the temperature sensor is in the battery) would fix the problem, but it didn't.

Given this situation I can't even upgrade the firmware as the machine powers off...

[conghuyms]

I have 5 faulty RX570 PowerColor VGA boards. All of them have the required power rails such as 0.9V, 1.8V, 1.5V for VRAM, and 3.3V for the bus. However, there is no 3.3V EN signal going to the VCCDI/VCORE power IC — it’s an IR chip, though I don’t remember the exact model. The fan doesn’t spin either. Unfortunately, I don’t have a boardview or schematic. Please help me. Thank you very much....