Could somebody help me to clean my bios region??
Board Code : Asus X441MA Rev 2.1
Serial Number : KBN0CV15J241485
Thanks for help....!...
Badcaps - Explore our electronics repair forums
Collapse
Collapse
-
OMEN 15-dh1003TX need remove bios password.
OMEN by HP 15-dh1003TX
is it even possible to erase bios passwords on such a new model?
im happy about any information which helps me making some progress.... -
Acer Nitro 5 AN515-54. displays on the external monitor and works fine, the issue is NO display on the internal screen
Good day!
I have a customer's laptop — Acer Nitro 5 AN515-54 (EH5VF - LA-H501P). It has a display on the external monitor and it's working fine, but the issue is NO display on the internal screen. I already replaced the eDP cable and checked the LCD connector pins.
Here are the voltage readings:- Input – 19V (stable)
- +LCDVDD – 3.3V briefly, then drops to 0V
- EDP_HPD – 3.3V briefly, then drops to 0V
- PCH_BKL_PWM – 2.2–5V briefly, then drops to 0V
- EC BKOFF# – 1.8V briefly, then drops to 0V
- PANEL_OD_EN – 0.3V
Is it possible that the EC chip is corrupted or damag...2 Photos -
yx-305d bench power supply decreasing voltage problem
This power supply is 30v 5amp. Problem is when turned on after about 3 minutes voltage starting to decrease slowly. (like - 5.8 > 5.7 > 5.6 > 5.5) can't see any damaged component or dry solder joints. Checked main 2 transistors with multimeter. Reading seems ok. Tried changing potentiometers(both coarse and fine) still the same situation. Can any one help me to troubleshoot? What voltages to check? Any ideas helps to fix this. thank you.!
... -
schematic JS471/JS573 NM-E541 help
If someone helps me with the scheme please lenovo... -
Bios & EC HP Pavilion 15 dag3himb8c0 rev c
Hi everyone. Plz needed bios & EC HP Pavilion Gaming Laptop. Model : 15-ec2001ns S/N : 5CD1213PSO MB : dag3himb8c0 rev c -
help with or xbox dead
has anyone ever had to replace the SVC chip on original xbox? 1.3 version
i have fully recapped main board and eliminated psu with working original
and checked the print for corrosion caused by leaking clock cap ect
box will start up fine when the SMC ic is frozen with freezer aerosol spray
but otherwise it just wont start,
sometimes the fan will spin if you keep holding the power on button
but it wont start up
i would value your opinion thanks...
No content found
Show More
Please log in to your account to view your subscribed posts.
What's Going On
Collapse
There are currently 874790 users online. 3455 members and 871335 guests.
Most users ever online was 1,342,976 at 10:51 PM on 04-26-2024.
Badcaps Statistics
Collapse
Topics: 221,493
Posts: 1,512,488
Members: 590,816
Active Members: 20,714
Welcome to our newest member, roibudoru.
Forums
Collapse
Top Active Users
Collapse
Today's Birthdays
Collapse
Latest Topics from Friends
Collapse
There are no results that meet this criteria.