Badcaps - Explore our electronics repair forums

Collapse
 
  • Time
  • Answered
  • Show
  • New Topics
Clear All
new posts

  • How to create a bios from múltiple files

    Greetings.
    I have dowloaded a Dell bios exe from the web page. After extracted it the folder generated is as showed in the picture. The bios is Taken apart in several files.

    If I use ME Analyzer, the Flash Image tools is 16.1 version but I cannot find this versión.

    So My question is how can I get the full bios or how to glue all the pieces to get the whole file?
    Thanks for your help...
    See more | Go to post

  • Rass
    started a topic Msi pro x670p wifi

    Msi pro x670p wifi

    Hi,
    I have an MSI Pro X670p Wi-Fi. When I boot directly with the CPU and memory, the red CPU LED and orange DRAM LED light up.
    I tried updating the BIOS with QFlash from USB, and there's a signal from pin 2. I checked all voltages and they're OK, including coils, chipset, BIOS, etc. I checked the pins between the CPU and RAM.
    I've also tried swapping the CPU for another one that's working in my personal PC and moving memory to different slots.
    If anyone has any ideas or suggestions, I'm at a standstill...
    If possible and if someone has a schematic it would also be...
    See more | Go to post

  • asrock h81m-itx/wifi bios

    i am looking for the asrock h81m-itx/wifi bios. thank you in advance
    See more | Go to post

  • Pingas
    started a topic need bin for Mac Air m2

    need bin for Mac Air m2

    Hi friends, I need a bin dump from a mac 820-02862 256GB
    See more | Go to post

  • Looking for GV-N970WF3OC-4GD boardview

    I'm looking for the GV-N970WF3OC-4GD REV:1.1 boardview (REV:1.0 would likely also suffice).

    I did get my hands on the schematics (Gigabyte_GV-N970WF3OC-4GD_Rev_1.1_.pdf) and a similar boardview (GV-N970TTOC-4GD_Rev_1.0_BoardView.tvw), but these are not sufficient for my needs.

    Thanks in advance!
    See more | Go to post

  • Is this a fusible resistor?

    This is from the power supply of an LED shop light. The light went completely dead suddenly. I removed the SMPS board and it looked really good except for some bad solder joints. I touched all of them up but the light was still dead. I then found this open resistor that was between the neutral wire of the plug and the transformer. The color bands seem non-standard. Does it indicate 13 ohm, 30 ohm...? I am not sure. What should I replace this with?


    ...
    See more | Go to post

  • HP OMEN 15-ax204ns burnt component on the board

    Good afternoon everyone,
    First of all, I’d like to apologize for my level of English.

    I have an HP OMEN 15-ax204ns laptop, purchased in 2018, with the following specifications:
    • Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz
    • 4.00 + 4.00 GB RAM
    • 1TB hard drive
    • Product ID: 00325-96088-89605-AAOEM
    • Operating system: Windows 10 64-bit

    It is in its original state, with no hardware modifications except for the battery, which had swollen and was replaced with a compatible one.



    For three or four months, I used the new battery without any issues, but...
    See more | Go to post
No content found
Show More
 
  • Time
  • Show
  • New Topics
Clear All
new posts
Please log in to your account to view your subscribed posts.

What's Going On

Collapse

There are currently 566287 users online. 4713 members and 561574 guests.

Most users ever online was 1,342,976 at 10:51 PM on 04-26-2024.

Badcaps Statistics

Collapse

Topics: 221,237   Posts: 1,509,207   Members: 588,002   Active Members: 21,543
Welcome to our newest member, GJL1979.

Forums

Collapse

Top Active Users

Collapse

Today's Birthdays

Collapse

Latest Topics from Friends

Collapse

There are no results that meet this criteria.

Working...