P1 Gen 5 (Type 21DC 21DD) Laptop (ThinkPad) - Type 21DC 213031-1

[trunguntilyou]

help me!! full power but no picture
Serial Number
PW02T530...

[vuko]

advantech innocore dpx-w220 can you remove or reed bios password,please.I will put the 2 files....

[Loki_Fido]

Hi folks,
Hope everyone's doing well.

I have a HP ProBook 450 G9 came in for repair. This driver is shorted and im looking to buy a replacement. But i cant identify this chip.
I checked our BadCaps sticky on following site
https://www.badcaps.net/forum/troubl...and-datasheets
But the name of the chip is wrong. I checked based on GND on chip.

If you check on above link, you'll think this chip is SY8388ARHC, but if you search...

[Arafat91]

Laptop-Ideapad 3 15iglo5(81wq)
Motherboard- GS453/GS553 nm-c961 rev 1.0
19-12-27
SN: PF2J3B2W
MTM: 81WQ004PIN
BIOS CHIP-WINBOND 25Q64JWSIQ2036
**PROBLEM- Some time caming diplay and logo showe and black screen
Or some time no display...

[ktmmotocross]

Have this PS5 EDM-033 with one beep. error is some short but i dont find one on main rails. need schem or guide to check all rails

I would like to have BV, schem or repair guide so add them here

[alihomee]

bios got password i tried RCunlocker but no luck ...i need to remove password from this file ....motherboard code is: UM4306HA R2.1...

[bluejaypop]

Hello everybody,

I'm looking for a boardview and/or schematics for

Device: Plotter Cutter motherboard
Brand: GCC
Model: GCC Expert II 24 XL

Thanks in advance!...

[ub6ib969]

Acer Predator PO3-650 BIOS can someone help convert .CAP to .BIN ?

Model Number: PO3-650
Part Number: DG.BK4AA.006
Serial Number : 33400117730
BIOS IC : XM25QH256C

I have uploaded the bios from the acer website and the extracted bios from the board. Any help would be appreciated...

[bobbyskillz]

Hello, experts! I have a weird issue I've never seen before. I know some of you have definitely seen this. I think some have seen in. I'd greatly appreciate any advice you can give me.

I bought a E241i-a1 to use as a monitor. It powers on, displays the image, and has sound. I just can't get the OSD to go away. The TV doesn't respond to any input from the remote contol or buttons except for the power button. Is this a firmware issue? I can't access settings to reset it. A quick search for the firmware has no results. I'm lost. Please throw some ideas at me.

Thanks for...