![]() |
Did I just bought a fakecap ?
4 Attachment(s)
Today I bought... I mean friend of mine bought capacitors that I ordered, as the shop where i bought it is too far away from me, as he isn't understands anything in electronics, he just bought it as I ordered. At first shop on their page showed 1800uf 6.3V Sanyo caps, with generic picture and code SY-1800(which isn't correct). After little bit of search I found out that it was WG 8X20 capacitors(p.s found that out before buy). Ok, ordered, next day friend gives me package with those caps and some other caps that I ordered. But... This were NOT the Sanyo WG, these were Panasonic(Matsushita) FL caps, which are not for public, so I can't find any datasheet for them... by dimensions these were the same 8X20 caps also I cound't measure ESR or Capacitance, as I don't have needed tool for that. If you have Panasonic FL 1800uf 6.3V, that you are 100% sure are real, then send pictures here, also picture of mine caps are attached bellow(p.s i bought those for 0.41BYN/0.16$ a piece).
|
Re: Did I just bought a fakecap ?
Quote:
I think that these caps are just generic Chinese low end caps. The price is wayy too low for something decent. I wouldn't buy or use these caps for anything critical. |
Re: Did I just bought a fakecap ?
real, but very old.
FL was rare even when they made them - mostly only used on pc motherboartds. |
Re: Did I just bought a fakecap ?
1 Attachment(s)
Found out That logo isn't the same as on real panasonic(photo attached), i got mobo with real FL panasonics, logo is little bit diffrent, also color of this ones is black/white, while of fl which were used on mobo are black/orange. Also font with temp and series is too low on my opinion.
|
Re: Did I just bought a fakecap ?
Quote:
Agree, I'm thinking that price is too low too, but this is was only variant that would fit into my motherboard with bulged Rubycon MCZ |
Re: Did I just bought a fakecap ?
Quote:
|
Re: Did I just bought a fakecap ?
replace MBZ or MCZ with polymers
|
Re: Did I just bought a fakecap ?
Quote:
|
Re: Did I just bought a fakecap ?
Quote:
|
Re: Did I just bought a fakecap ?
i use cheap ali-express polymers.
even crap ones are better than the best electrolytics :) |
Re: Did I just bought a fakecap ?
Quote:
|
Re: Did I just bought a fakecap ?
polymers dont have a sleeve, or a vent on top.
some foto's and links https://www.badcaps.net/forum/showthread.php?t=78134 |
Re: Did I just bought a fakecap ?
Quote:
|
Re: Did I just bought a fakecap ?
fake polymers? you mean fake maker or fake as in, they arent polymer??
|
Re: Did I just bought a fakecap ?
Quote:
|
Re: Did I just bought a fakecap ?
i cant see it, they would need a cap factory and polymers are shorter so regular electrolytic guts cant be inserted into a polymer casing.
the only shit electrolytic that gets mistaken for a poly is the infamous FZ's |
Re: Did I just bought a fakecap ?
Quote:
|
Re: Did I just bought a fakecap ?
there is no need to fake modern parts.
china is the worlds electronics factory - they have lots of "surplus" ;) from pcb production lines. :D |
Re: Did I just bought a fakecap ?
3 Attachment(s)
*Update*
Those caps didn't survived, maybe they are still working but they are bulged(Screen attached)... They didn't survived because they got overheated(common problem on this ASUS P5B-VM board, saw another one for sale with same bulged caps, screen attached by the way), even original factory Rubycons MCZ didn't survived this one, so those caps wouldn't get even a chance either :( Also near are Kemet A758 caps which I bought from same seller, they are still good(0.67 BYN / 0.27 USD each btw), they replaced 3 bulged and one none bulged Evercon 330uF 6.3V which were installed from factory for some reason... So maybe you'll give me an advice which poly cap to use for this board, as I didn't found any 1800uF 6.3V poly cap on Ali. |
Re: Did I just bought a fakecap ?
Check the polarity of the capacitors: you installed them backwards.
Asus are crazy and uses the half circle on the PCB to designate the positive side. See for example: https://www.badcaps.net/forum/showthread.php?t=10480 https://www.badcaps.net/forum/showthread.php?t=16890 |
All times are GMT -6. The time now is 06:20 PM. |
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.