Badcaps Forums - over voltage on power supply

Badcaps Forums (https://www.badcaps.net/forum/index.php)

- Troubleshooting Power Supplies and Power Supply Design (https://www.badcaps.net/forum/forumdisplay.php?f=32)

- - over voltage on power supply (https://www.badcaps.net/forum/showthread.php?t=85039)

DjKrish

06-03-2020 10:50 PM

over voltage on power supply

1 Attachment(s)

Hi guys, i have a Sony home theater which is currently on Protect mode, SD ERR code which is the power supply. I tested the voltages across the pins and its higher than rated. Suppose to be 14V but showing 20V instead, 6V showing as 9V instead. With or without load, its the same. Model is dav-dz840k. Any idea why this is happening? I have attached the service manual with this post. All the voltages seems bizarre on the power board while measuring.

CapLeaker

06-04-2020 05:26 AM

Re: over voltage on power supply

read page 18 on your SM

DjKrish

06-04-2020 08:10 AM

Re: over voltage on power supply

popped out the 1st cxd chip, problem solved. its a amp short. now unit is working fine. need to replace the faulty cxd chip.

DjKrish

06-21-2020 07:28 PM

Re: over voltage on power supply

CXD ic replaced and set working perfectly fine, looks like this is a very common problem with sony. Hope this helps others.

All times are GMT -6. The time now is 01:08 PM.