Badcaps Forums

Badcaps Forums (https://www.badcaps.net/forum/index.php)
-   Equipment Usage, Soldering, Techniques, and Reviews (https://www.badcaps.net/forum/forumdisplay.php?f=33)
-   -   Question about solder paste vs solder balls (https://www.badcaps.net/forum/showthread.php?t=101405)

menshawy 12-04-2021 07:49 AM

Question about solder paste vs solder balls
 
hi friends
what about using solder paste to reflow vram because it is easier than solder balls
but it will working perfectly or it will die after short time ?
I need your experience
thanks

a_tiny_ant 12-09-2021 01:43 PM

Re: Question about solder paste vs solder balls
 
I think solder paste is easier to work with, since it's essentially many small balls suspended in flux. It sticks easily and the flux helps a lot in making a proper solder bond. You do need to keep in mind that it has less actual solder in it because flux makes up a large part of the volume.

As for longevity, it shouldn't matter if a proper solder bond is formed. Flux helps a lot.

menshawy 12-24-2021 09:36 AM

Re: Question about solder paste vs solder balls
 
Quote:

Originally Posted by a_tiny_ant (Post 1090475)
I think solder paste is easier to work with, since it's essentially many small balls suspended in flux. It sticks easily and the flux helps a lot in making a proper solder bond. You do need to keep in mind that it has less actual solder in it because flux makes up a large part of the volume.

As for longevity, it shouldn't matter if a proper solder bond is formed. Flux helps a lot.

thanks


All times are GMT -6. The time now is 02:06 AM.

Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.