Badcaps Forums

Badcaps Forums (https://www.badcaps.net/forum/index.php)
-   Troubleshooting TVs and Video Sources (https://www.badcaps.net/forum/forumdisplay.php?f=31)
-   -   Samsung UN55EH6000F Power issue (https://www.badcaps.net/forum/showthread.php?t=102737)

CraigR 01-20-2022 12:41 PM

Samsung UN55EH6000F Power issue
 
2 Attachment(s)
I got in a Samsung UN55EH6000F with no power and blown fuse on the board (BN44-00499A) I found 3 bad mosfets and a blown resistor circled in the pictures. Now just putting power to the board and checking voltages I get what I need 13v then goes off and on over and over. I connected to TV and TV powers on with sound then off over and over again. I did not include pics of the TV since it is in the power board. So what would cause it to power on and off repeatedly? ?

nomoresonys 01-20-2022 07:33 PM

Re: Samsung UN55EH6000F Power issue
 
Check all the diodes and touch up any solder joints that look odd.

CraigR 01-20-2022 07:36 PM

Re: Samsung UN55EH6000F Power issue
 
Yep, went through all that before posting.

R_J 01-20-2022 07:51 PM

Re: Samsung UN55EH6000F Power issue
 
That looks like a gate drive resistor, I would check the zener diodes and the other resistors in that drive circuit.
One of the components you have circled is the standby ic, was it replaced as well?

nomoresonys 01-20-2022 08:21 PM

Re: Samsung UN55EH6000F Power issue
 
Quote:

Originally Posted by CraigR (Post 1100976)
Yep, went through all that before posting.

At least a few still look cracked to me.

CraigR 01-26-2022 02:08 PM

Re: Samsung UN55EH6000F Power issue
 
Quote:

Originally Posted by R_J (Post 1100983)
That looks like a gate drive resistor, I would check the zener diodes and the other resistors in that drive circuit.
One of the components you have circled is the standby ic, was it replaced as well?

Yes, it was replaced also.

CraigR 01-26-2022 02:38 PM

Re: Samsung UN55EH6000F Power issue
 
1 Attachment(s)
I found this mosfet (2 legs gone now) with nothing going threw it compared to other one with same number. Anybody know how I can get a good number to get another? WR N7 not coming up with anything on google.

R_J 01-26-2022 03:24 PM

Re: Samsung UN55EH6000F Power issue
 
What is the board location?

dskall 01-26-2022 03:30 PM

Re: Samsung UN55EH6000F Power issue
 
Looks to be an NPN. If it is sot-23
WR 2PD602R Si-npn GP, Sw, 60V, 500mA, 250mW, B=120..240, >160MHz SOT-23

If you have a component tester, just remove the other one and check it.

diif 01-26-2022 03:33 PM

Re: Samsung UN55EH6000F Power issue
 
.

CraigR 01-26-2022 03:47 PM

Re: Samsung UN55EH6000F Power issue
 
Quote:

Originally Posted by R_J (Post 1103016)
Might be 2SK322WR What is the board location?

ZDL802 so must be zener diode and not a mosfet? the N made me think N channel?

lotas 01-26-2022 04:04 PM

Re: Samsung UN55EH6000F Power issue
 
2 Attachment(s)
Bzx84c24-au

R_J 01-26-2022 04:04 PM

Re: Samsung UN55EH6000F Power issue
 
That looks correct, let me guess, they are in the gate circuit.

lotas 01-26-2022 04:23 PM

Re: Samsung UN55EH6000F Power issue
 
1 Attachment(s)
in the gate circuit

CraigR 01-27-2022 01:52 PM

Re: Samsung UN55EH6000F Power issue
 
Yep. Thanks for the number! I will order some up and get back with how it goes.

CraigR 02-03-2022 10:48 AM

Re: Samsung UN55EH6000F Power issue
 
UPDATE: Same thing. 13v then zero just keeps doing it over and over. I was looking it all over again and see a tiny crack in the big green thermister wtr15d050 but I get 8.3 ohms cold so not sure if the crack means damage or not?

R_J 02-03-2022 12:39 PM

Re: Samsung UN55EH6000F Power issue
 
What about the A5V is it changing as well?

CraigR 02-03-2022 01:07 PM

Re: Samsung UN55EH6000F Power issue
 
Quote:

Originally Posted by R_J (Post 1105896)
What about the A5V is it changing as well?

Yes it is.

R_J 02-03-2022 01:39 PM

Re: Samsung UN55EH6000F Power issue
 
Quote:

Originally Posted by CraigR (Post 1105911)
Yes it is.

The first thing I would try is to connect the PS_ON/OFF pin to ground, this should place the power supply in standby mode, then you can see if the standby voltage A5V is stable.
CNM803 pin 14 is PS_ON/OFF

CraigR 02-03-2022 02:12 PM

Re: Samsung UN55EH6000F Power issue
 
Quote:

Originally Posted by R_J (Post 1105930)
The first thing I would try is to connect the PS_ON/OFF pin to ground, this should place the power supply in standby mode, then you can see if the standby voltage A5V is stable.
CNM803 pin 14 is PS_ON/OFF

Zero volts 5 nor 13 when when PS_ON/OFF jumped to ground.


All times are GMT -6. The time now is 03:14 AM.

Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.