Badcaps.net Forum
Go Back   Badcaps Forums > Search Forums
Register FAQ Calendar Search Today's Posts Mark Forums Read

Showing results 1 to 25 of 500
Search took 0.02 seconds.
Search: Posts Made By: Per Hansson
Forum: General Electronics Technical Discussion Yesterday, 05:40 AM
Replies: 5
Views: 71
Posted By Per Hansson
Re: What is this "processor"

Hello, please see this FAQ for how to insert photos in your posts:
https://www.badcaps.net/forum/showthread.php?t=1868

Have you checked the four discrete transistors Q1 > Q4 on the board to make...
Forum: General Electronics Technical Discussion Yesterday, 05:21 AM
Replies: 19
Views: 130
Posted By Per Hansson
Re: flourescent ballast resistance

In one of DiodeGoneWild latest videos he tests a 36w CFL ballast:

https://youtu.be/B4YM_ljELl4?t=723
Forum: Troubleshooting Computer Displays Yesterday, 04:31 AM
Replies: 21
Views: 8,048
Posted By Per Hansson
Re: Dell P2210f no power

Your photos are not usable, here is what I used instead: https://www.badcaps.net/forum/showpost.php?p=599033&postcount=30

I made one omission in my previous post: 12v does not seem to be for that...
Forum: General Electronics Technical Discussion 06-28-2022, 06:51 AM
Replies: 18
Views: 221
Posted By Per Hansson
Forum: Equipment Usage, Soldering, Techniques, and Reviews 06-28-2022, 06:20 AM
Replies: 1,118
Views: 184,649
Posted By Per Hansson
Re: ESR meter upgrades

You can see a photo of the top of the encoder in my original build photo way back in this thread: https://www.badcaps.net/forum/attachment.php?attachmentid=137396&d=1468518476
Here is how the bottom...
Forum: General Electronics Technical Discussion 06-28-2022, 04:46 AM
Replies: 18
Views: 221
Posted By Per Hansson
Re: Reading input and output of bridge rectifier on the same scope?

Yes, to get around that instead of using an isolation probe (the proper tool for the job) you can utilize two oscilloscope probes as I alluded to in my post above.
What you do is simply hook one to...
Forum: Troubleshooting Computer Displays 06-28-2022, 02:30 AM
Replies: 21
Views: 8,048
Posted By Per Hansson
Re: Dell P2210f no power

I would not buy from that seller because he mixed up the type of diode in the title of the AD vs the description!
"Ultra Fast Recovery Diode" vs "Standard General Purpose"
-Typical Chinese crap,...
Forum: Equipment Usage, Soldering, Techniques, and Reviews 06-27-2022, 12:28 PM
Replies: 1,118
Views: 184,649
Posted By Per Hansson
Re: ESR meter upgrades

I compiled a new build of Karl-Heinz firmware from the new GIT repository (https://github.com/kubi48/TransistorTester-source) a few days ago.
It works well on my GM328R, this time I only included a...
Forum: Troubleshooting Computer Displays 06-27-2022, 02:54 AM
Replies: 21
Views: 8,048
Posted By Per Hansson
Re: Dell P2210f no power

In the original post of this thread you can find the service manual:
https://www.badcaps.net/forum/showthread.php?t=48690

I would replace both diodes with a matched pair of ultrafast diodes with...
Forum: Troubleshooting Game Consoles & Other Weird Devices 06-27-2022, 02:15 AM
Replies: 19
Views: 259
Posted By Per Hansson
Re: Xbox 1.6 Motherboards and Polymer Capacitors

Well there is nothing inherently difficult with it:
You just measure the voltage on the different capacitors with the system running to see what voltage rails they are on...
For example the Pentium...
Forum: Troubleshooting Computer Displays 06-26-2022, 11:14 AM
Replies: 661
Views: 356,030
Posted By Per Hansson
Re: Samsung Syncmaster 225BW

I would check the ESR of those surface mount electrolytic capacitors.
Probably after all these years with heat they are bad.
Forum: Troubleshooting Game Consoles & Other Weird Devices 06-26-2022, 09:18 AM
Replies: 19
Views: 259
Posted By Per Hansson
Re: Xbox 1.6 Motherboards and Polymer Capacitors

It might be worth it to measure the voltage on those caps and if it is low enough use 2.5v 3300F polymer caps:
They are not in old recommendations simply because they did not exist back then....
Forum: General Electronics Technical Discussion 06-26-2022, 01:32 AM
Replies: 18
Views: 221
Posted By Per Hansson
Re: Reading input and output of bridge rectifier on the same scope?

In short the reason is that the ground clip is connected to earth ground, and all of the channels of the scope share the same earth so you shorted primary to secondary...
To measure this safely you...
Forum: Troubleshooting Power Supplies and Power Supply Design 06-24-2022, 11:56 AM
Replies: 28
Views: 664
Posted By Per Hansson
Re: Learning with ATX CHIEFTEC 450W PSU

I would say it is still starved for power, but you really should check the integrity of the APFC swiching mosfets (Q11/Q12 & Q1/Q3 from the schematic kaboom posted) if you do suspect that the supply...
Forum: Troubleshooting Power Supplies and Power Supply Design 06-24-2022, 03:50 AM
Replies: 28
Views: 664
Posted By Per Hansson
Re: Learning with ATX CHIEFTEC 450W PSU

What voltage do you read on the primary capacitor during this test?
If your line voltage is 230VAC then it should be around 230VAC x √2 = 325VDC in standby.
And when you start it up it should be...
Forum: General Capacitor Questions & Issues 06-21-2022, 10:28 AM
Replies: 6
Views: 197
Posted By Per Hansson
Re: Cleaning up capacitor leakage

I would recommend cleaning using acetic acid if it leaked on the board.
Every time I do I can see bubbles and hear fizzing as I put it on the areas with leaked electrolyte, so it does a chemical...
Forum: Troubleshooting Power Supplies and Power Supply Design 06-21-2022, 09:52 AM
Replies: 28
Views: 664
Posted By Per Hansson
Re: Learning with ATX CHIEFTEC 450W PSU

As I explained in my previous post it will be different for each PSU design.
What works on this one will obviously not work on another with a different APFC controller and there are many of those!
...
Forum: Troubleshooting Power Supplies and Power Supply Design 06-20-2022, 01:35 PM
Replies: 28
Views: 664
Posted By Per Hansson
Re: Learning with ATX CHIEFTEC 450W PSU

It is disabled, but as stated in the datasheet you can't be sure it has 0% duty cycle.
It is better to desolder the OVP/EN pin as that has the sole purpose of enabling the circuit.
Every power...
Forum: Troubleshooting Power Supplies and Power Supply Design 06-20-2022, 10:06 AM
Replies: 28
Views: 664
Posted By Per Hansson
Re: Learning with ATX CHIEFTEC 450W PSU

Well, maybe try desoldering the whole APFC board then, I'm not sure it is disabled now.
Or disconnect the OVP/EN pin instead.
Forum: Troubleshooting Power Supplies and Power Supply Design 06-20-2022, 08:00 AM
Replies: 28
Views: 664
Posted By Per Hansson
Re: Learning with ATX CHIEFTEC 450W PSU

Try to increase to a 120w bulb, you can of course use two parallel 60w bulbs instead...

Also note the remark in the datasheet about grounding the SS pin:
Note: In an open-loop test circuit,...
Forum: Troubleshooting Power Supplies and Power Supply Design 06-19-2022, 03:17 AM
Replies: 28
Views: 664
Posted By Per Hansson
Re: Learning with ATX CHIEFTEC 450W PSU

Ok, the original Samxon capacitor is fine, remember that capacitors have a +/- 20% tolerance rating...

To test the power supply without APFC you can either ground the UCC3818N APFC controller...
Forum: Troubleshooting Audio Equipment 06-18-2022, 02:03 PM
Replies: 87
Views: 1,607
Posted By Per Hansson
Re: Sony STR-DN1030 Distorted audio when Volume adjusted

CapLeaker: As is the videos are too big to upload, they can be converted in VLC to be smaller.
I did try and after conversion they are ok, but it would waste allot of server storage space if videos...
Forum: Troubleshooting Power Supplies and Power Supply Design 06-18-2022, 11:29 AM
Replies: 28
Views: 664
Posted By Per Hansson
Re: Learning with ATX CHIEFTEC 450W PSU

I don't have a good answer, but you can't bring up a APFC PSU on such a low wattage bulb.
Look at my post here for an example of what you can try:...
Forum: Troubleshooting Power Supplies and Power Supply Design 06-18-2022, 03:14 AM
Replies: 28
Views: 664
Posted By Per Hansson
Re: Learning with ATX CHIEFTEC 450W PSU

45.2,14.4 (https://www.google.com/maps/place/4512'00.0"N+1424'00.0"E) is in the Adriatic Sea, so I would guess 230VAC on a raft between Krk and Opatija :D
Forum: Troubleshooting Power Supplies and Power Supply Design 06-18-2022, 03:04 AM
Replies: 54
Views: 1,612
Posted By Per Hansson
Re: Cyberpower CP900EPFCLCD - F03 Error

Well you probably will not find that on sites like eBay, what you need is some basic electronic components.
They could even be harvested from some old PC power supply for example.

But ST also...
Showing results 1 to 25 of 500

 
Forum Jump


Badcaps.net Technical Forums 2003 - 2022
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 12:44 AM.
Did you find this forum helpful?