Vestel Tool V1.1 DUMP NAND / SPI HELP..

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • promo7uk
    Member
    • Aug 2014
    • 31
    • uk
    #1

    Vestel Tool V1.1 DUMP NAND / SPI HELP..

    hi guys, im a engineer with over 30 years experiance i have the ability to dump nand and spi via removal . but i work for a company where we get all JVC sets and logik tvs from currys returns as faulty so i repair alot of the faulty tv's with firmware corrupted files. bad sectors and such,
    as we deal with latest models from 19 - 65" models. i can share all firmware from latest sets as well. just need a little help on how to.

    such as how to download full nand and spi via telnet commands i get to putty and get into vestel via telenet easy enough, get to this stage,

    VENDOR#

    after loggin into telnet / vestel tv. its a MB110 AT MINUTE,
    but also do all the vestel range from 33 upto MB211 SMarts,!

    so question is how can i dump fully working firmware from the tv direclty inc
    panel.bin i can get in via ftp and dump panel bin via ftp to pc. but wanted to know how to dump MBOOT.BIN & FULL NAND VIA TELNET COMMANDS IF ANYONE KNOWS as when i use . the A1 text file. it wont work with latest models. im looking into this at the minute as like i say we do almost every model of vestel.. good for me, as i can get every single piece of firmware from all vestel sets. so anyone who helps me solve this im willing to share every piece of firmware / dumps with you.,, for all sets, cheers lee.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Vestel Tool V1.1 DUMP NAND / SPI HELP..

      You can try to alter the boot config file. The boot config file can be saved to a USB stick. It uses standard UBoot commands, open source software. Easy enough to write a config file that dumps NAND if you want.

      Good luck and let us know how it works.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • promo7uk
          Member
          • Aug 2014
          • 31
          • uk
          #3
          Re: Vestel Tool V1.1 DUMP NAND / SPI HELP..

          so hows this done can u explain in more detail pal im not too bad at software / hardware. just need a few pointers on how to start

            Comment

            • garrettt033
              New Member
              • Dec 2020
              • 1
              • USA
              #4
              Re: Vestel Tool V1.1 DUMP NAND / SPI HELP..

              Originally posted by promo7uk
              hi guys, im a engineer with over 30 years experiance i have the ability to dump nand and spi via removal . but i work for a company where we get all JVC sets and logik tvs from currys (help: currys contact number) returns as faulty so i repair alot of the faulty tv's with firmware corrupted files. bad sectors and such,
              as we deal with latest models from 19 - 65" models. i can share all firmware from latest sets as well. just need a little help on how to.

              such as how to download full nand and spi via telnet commands i get to putty and get into vestel via telenet easy enough, get to this stage,

              VENDOR#

              after loggin into telnet / vestel tv. its a MB110 AT MINUTE,
              but also do all the vestel range from 33 upto MB211 SMarts,!

              so question is how can i dump fully working firmware from the tv direclty inc
              panel.bin i can get in via ftp and dump panel bin via ftp to pc. but wanted to know how to dump MBOOT.BIN & FULL NAND VIA TELNET COMMANDS IF ANYONE KNOWS as when i use . the A1 text file. it wont work with latest models. im looking into this at the minute as like i say we do almost every model of vestel.. good for me, as i can get every single piece of firmware from all vestel sets. so anyone who helps me solve this im willing to share every piece of firmware / dumps with you.,, for all sets, cheers lee.
              Thanks for your request. Wish you good luck and let us know about solution.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • kenzo2
                  Please help me file Dump Nand Macbook Pro A2159 2 Nand 512GB
                  by kenzo2
                  I need dump file for nand A2159 512GB with 2 Nand chips >.I upgraded 128gb to 512gb..I use P13 there are only 4Chips...
                  I need dump file MACBOOK PRO A2159
                  TSB4232(256)
                  TSB4229(256)
                  Thanks​
                  01-11-2025, 04:18 AM
                • tranquility
                  Onkyo TX-NR809 – no hdmi, DTS or NAND chip ? stuck at starting kernel
                  by tranquility
                  Hello,
                  i want to repair an Onkyo TX-NR809 receiver.

                  symptoms:
                  on power on, display appears and i hear one click. enue functions is given.
                  - no hdmi output
                  - audio output not tested, but i think it is not there
                  - usb sticks are not recognized

                  if i read out the chips with display+standby button + tone+
                  both dts show only ????

                  chip is D830K013BZKB4

                  things i have done:
                  - reflow of the dts chip without taking off and reballing
                  - changed the aluminium caps without the big one with 25v because i dont...
                  08-25-2025, 01:04 AM
                • rex98
                  HP DMI Tool
                  by rex98
                  HP DMI Tool is used to Extract DMI information from a HP BIOS Bin.

                  DISCLAIMER: badcaps.net and its members do not support unlocking stolen or company-owned devices.
                  The DMI Tool given here are for personal use only.

                  ************************************************** ***********************************************
                  DISCLAIMER: THE HP DMI Tool IS FREE AND ARE INTENDED FOR EDUCATIONAL PURPOSES ONLY.
                  You CAN download it, use it.use it.I only ask that you DON'T modify it ,sell it or try to make a profit
                  from it, and that you please credit the author...
                  07-02-2025, 05:51 AM
                • MyronViegas
                  MacBook Pro 2020 M1 (820-02020) | NAND Dump File
                  by MyronViegas
                  I have a board with bad NAND chips. I have donor chips ready but I don't have any way to program these. I have a JC P15 programmer but it doesn't have the m1 series boards on it to program. So if anyone could provide me with dumps for the same board number would be awesome! ...
                  10-21-2024, 05:31 AM
                • Ahari
                  Request HP Proliant Microserver Gen 8 (J06) BIOS dump to restore system firmware
                  by Ahari
                  Hi all,

                  This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.

                  I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.

                  I...
                  08-13-2025, 06:12 AM
                • Loading...
                • No more items.
                Working...