View Single Post
Old 08-28-2021, 07:42 AM   #1
N3Star
New Member
 
Join Date: May 2021
City & State: Frielendorf
My Country: Germany
I'm a: Knowledge Seeker
Posts: 13
Default PS3 CECHC04 no power

Hi all,
I have 2 mobos - both COK-002, one with YLOD and without NEC/TOKINs on one side (if needed any comparison measurements I also have working COK-002) and one that literally doesn't do anything. So far I checked roughly capacitors on both sides, none seem to be shorted. Another thing are voltages coming to CSW-001 board - on the connector seems to be no sign of 1.6V, 3.3V or 2.8V (comparing to YLOD mobo), but 5V coming from PSU is present, I am unable to check if 12V is present on mobo as it "activates" when PSU is on. Also resistances on RSX caps seem to be quite low - less than 2 Ohms, but if it powers on I will be able to check syscon errors.
N3Star is offline   Reply With Quote