View Single Post
Old 07-03-2020, 08:19 PM   #53
budm
Badcaps Veteran
 
budm's Avatar
 
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 38,504
Default Re: Old Gateway 2000 speakers out of sorts.

Per your readings in post #48
Pin 2: Bootstrap 2 reported as:14.5
Pin 6: Bootstrap 1 reported as: 0.46. This one looks bad. You may want to check that cap between pin 5 and pin 6.

Pin 3: Output 2 reported as:0.5
Pin 5: Output 1 reported as: 0.5
I expect them to be like that, 0.50V, if pin 8 VCC 2 Voltage is not present when headphone is plugged in, but you have VCC2 on pin 8 of the IC.
I guess you can try new TA chip.
__________________
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956

Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999

Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl

Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/

TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809

Last edited by budm; 07-03-2020 at 08:24 PM..
budm is offline   Reply With Quote