Thanks for fast answer. Flashed with techman1025 dump now I have progres bar with Phoenix logo but stucked, can't enter into bios with F2 or F4. With whaldsz dump behaves same as original...
I think motherboard is bad??
There's pictures:
I tried it already...
Customer says that sometimes the start, after many attempts. The disc is correct, it is possible that the failure of the board ...
Hi
You could try a new bios chip and reprogram it with mine. Also try with only one memory stick in and do the same for the other socket see if it hangs so only one at a time you might have a bad stick of memory or a bad socket if one socket is bad double up on one socket is the only fix.
Techman1025
I tried it already...
Customer says that sometimes the start, after many attempts. The disc is correct, it is possible that the failure of the board ...
Hi
What i would do is put some good flux under the onboard memory chip's and apply a little heat like 100C then retest if it works you could always replace them.
Techman1025
NP700Z7C ba92 11017b dump maybe? accidentally erased the stock firmare before backup it first in my programer. I tried with last firmware whaldsz posted for BA92-10916B and only get backlight of the display and then he is restarting again and again and again
Hello,
I need NP700Z7C BA92-10916A working bios, any chance someone have it?
It is stuck in samsung logo.
Here is the suspected not working dump.
Thanks
Comment