Quote:
Originally Posted by ngth82
Likely just a pull up resistor.
Did you by any chance check the resistance of that location when you grabbed it from a BLOD system?
|
A video game shop owner brought me a botched PS4 that someone tried to replace the HDMI port with the resistors out of placement from too much heat and a missing zener diode.
The two light blue/gray resistors on a CUH-1115A have the following attributes:
2k ohms
1 x 0.5mm or 0402 (1005 metric)
Height: 0.35mm
Power: either 1/16W or 1/10W, higher probably better
I've replaced several zener diodes with P/N VDZT2R5.6B on PS4s, and they've always worked. They're close to the port on the CUH-1215A model, and sometimes customers push the ports inward knocking off the diode. Saw two diodes blow along with an HDMI encoder IC once.