View Single Post
Old 09-29-2021, 06:08 PM   #58
momaka
master hoarder
 
momaka's Avatar
 
Join Date: May 2008
City & State: VA (NoVA)
My Country: U.S.A.
Line Voltage: 120 VAC, 60 Hz
I'm a: Hobbyist Tech
Posts: 10,862
Default Re: xbox 360 blowing mosfet

Quote:
Originally Posted by risting View Post
Tnx for respond, it is possible to use regulator LD1117AS18TR IC REG LDO 3.3v and 1.8V 1.2A SOT-223 small size ?
Most likely, YES.
Just make sure these are "fixed" regulators - i.e. set to output only 1.8V or 3.3V. The left-side pads for these regulators on the Xbox 360 motherboard are directly connected to ground. So if you tried to use an "adjustable" 1117 regulator, you'd likely only get 1.2V.

Quote:
Originally Posted by risting View Post
How to protect motherboard when installing rgh need resistors 100ohm before wires?
Not sure, I've never had to do this mod before.
momaka is offline   Reply With Quote