View Single Post
Old 11-20-2021, 03:59 PM   #3
SMDFlea
Super Moderator
 
Join Date: Jan 2018
City & State: York
My Country: UK
I'm a: Knowledge Seeker
Posts: 10,494
Default Re: bricked my laptop ram from messing around too much with spdtool!

Quote:
Originally Posted by ChaosLegionnaire View Post
so i tried looking for either an spd programmer or ddr2 laptop sodimm to desktop dimm adapter but the latter only exists for ddr3 and ddr4. the ones i found on junkbay and aliexpress only actually work as a ddr2 sodimm to sodimm adapter.
You can still use the smaller adapters you just need to solder a few wires to the pins so that it can be used with an SPI programmer.

This one is a ddr3 adapter https://www.badcaps.net/forum/showpo...03&postcount=4

The spd chips are 24c02 ,if you can find some old ram you can solder some wires to it,program it with an spd dump then solder the new one on. https://www.badcaps.net/forum/showpo...2&postcount=13
.

Last edited by SMDFlea; 11-20-2021 at 04:12 PM..
SMDFlea is offline   Reply With Quote