View Single Post
Old 10-12-2020, 08:59 AM   #3
tester272001
Member
 
tester272001's Avatar
 
Join Date: Apr 2011
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Hardcore Geek
Posts: 71
Default Re: Treadmill Motor Control Board 032669-IF

The general things you can do are, INSPECT the board and componenets on both sides. The underside for any solder joints that might be "cold" - Also look for capacitors that might have leaked or bulged. I gooogled that part and it is about $280 USD. Check diodes using a multimeter. Verify anything marked F1/f2 etc as they are usually fuses and should have continuity. Sending pics of both sides will be most helpful as Budm has said.
tester272001 is offline   Reply With Quote