Announcement

Collapse
No announcement yet.

Suggestions which FLASH programmer to buy...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Suggestions which FLASH programmer to buy...

    Hello,

    I need to buy a USB FLASH programmer to erase, program and test 4GB (32Gbx1) K9GAG08U0E-PCB0 TSOP48 NAND FLASH chips and 512KB (4Mbx1) MX25L4006EM1I-12G serial FLASH 8pin SOP chips. Most of all I need comprehensive testing of these chips so I can manage which ones are bad. I have hundreds of these chips removed from bad tablet mainboards...

    I found this cheap programmer on ebay:

    http://www.ebay.com/itm/171341819315...%3AMEBIDX%3AIT

    What do you think of it? Is this programmer and it's software capable of testing/programming my chips, especially 4GB NAND flash TSOP48??

    Any help and suggestion is more than welcome.

    Thanks!

    Cheers,

    Suad
    Attached Files

    #2
    Re: Suggestions which FLASH programmer to buy...

    Anyone? Please...

    S

    Comment


      #3
      Re: Suggestions which FLASH programmer to buy...

      Have a look at the EEVblog - there's a huge thread there about it
      I bought mine from Amazon.

      Comment


        #4
        Re: Suggestions which FLASH programmer to buy...

        Chriso, thank you for the link. Well, is a 39 pages thread, so I suppose answer to my question won't be so easy ;-) Actually, I'm not quite optimistic about this programmer is capable of programing 4GB NAND flash chips...

        S

        Comment


          #5
          Re: Suggestions which FLASH programmer to buy...

          i have the TL866 with many adapters and it is working fine, the released the 6.1 version now. It is simple tu use
          ...the quieter you become the more you are able to hear...

          Comment


            #6
            Re: Suggestions which FLASH programmer to buy...

            rtstorm, did you try to erase, program and test large TSOP48 4GB NAND flash chips?

            Comment


              #7
              Re: Suggestions which FLASH programmer to buy...

              i did not, most of the time i use them to flash notebook bios. But i also use on MAXIM 29LV008CBTC-70G FLASH MEMORY chip and its doing great.
              ...the quieter you become the more you are able to hear...

              Comment


                #8
                Re: Suggestions which FLASH programmer to buy...

                Stilling running a parallel-port based Willem here... I don't use it much!
                "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                -David VanHorn

                Comment


                  #9
                  Re: Suggestions which FLASH programmer to buy...

                  Originally posted by Agent24 View Post
                  Stilling running a parallel-port based Willem here... I don't use it much!
                  NOOOOOoooooooooooooo.................

                  Comment


                    #10
                    Re: Suggestions which FLASH programmer to buy...



                    It works - when you load the right program version.
                    "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                    -David VanHorn

                    Comment


                      #11
                      Re: Suggestions which FLASH programmer to buy...

                      but it's like, 1hour per chip or something from what i remember!!!

                      Comment


                        #12
                        Re: Suggestions which FLASH programmer to buy...

                        I guess it would be slower than a USB one. But I haven't seen anything take 1 hour though... but I haven't tried anything over 16Mbit IIRC, which took a few minutes. Most chips I do are very small and are under a minute.

                        I don't even know if it supports anything really huge.. I doubt it.
                        "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                        -David VanHorn

                        Comment


                          #13
                          Re: Suggestions which FLASH programmer to buy...

                          i'm doing a lot of 32Mbit chips, and i'm glad i'm using a 48XP to do them!

                          Comment


                            #14
                            Re: Suggestions which FLASH programmer to buy...

                            Originally posted by stj View Post
                            i'm doing a lot of 32Mbit chips, and i'm glad i'm using a 48XP to do them!
                            Well, I'm talking about 32Gbit... :-)

                            S

                            Comment


                              #15
                              Re: Suggestions which FLASH programmer to buy...

                              if you just want to do serial nandflash,
                              you can use a modified xd-picturecard reader.

                              those are just nandflash

                              Comment


                                #16
                                Re: Suggestions which FLASH programmer to buy...

                                yes yes! but how you read the dam HEX file!
                                my head hurts! pfffff
                                Just cook it! It's already broken.

                                Comment


                                  #17
                                  Re: Suggestions which FLASH programmer to buy...

                                  you mean how to read the chip?
                                  well use linux and use the DD command to copy the whole device as sectors to a file.

                                  or there are windows programs to do it, but i cant remember the name.

                                  keep in mind, you probably cant make sense of the dump, it's only good for cloning.
                                  most serial flash uses some type of filesystem.
                                  if you dont know the detail you cant mount it and mess with the content.

                                  also, writing to flash with errors may be an issue because the error mapping may clash with the dump.

                                  these issues arent related to xd-hacks, but effect *all* nandflash programmers.

                                  Comment


                                    #18
                                    Re: Suggestions which FLASH programmer to buy...

                                    SmartPro X8 😉

                                    Comment


                                      #19
                                      Re: Suggestions which FLASH programmer to buy...

                                      Whichever one has the best software or support. All the fancy hardware in the world won't do anything if they decide to release only some shitty software that only works in Windows 95 or something.
                                      "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                                      -David VanHorn

                                      Comment


                                        #20
                                        Re: Suggestions which FLASH programmer to buy...

                                        http://www.ebay.com/itm/TNM-2000-USB...-/321207236799
                                        There is a 5000 model also.

                                        Comment

                                        Working...
                                        X