On the recent sale I've ordered a new Aixun T3A with the T245 soldering pen and it comes with the fancy pen holder. Wonder if anyone has one and if your happy with it? It's got some decent reviews. On YouTube a guy compared it with the JBC and results were pretty darn good fur such a cheap rig.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Anyone tried or got the Aixun T3A with the T245 pen?
Collapse
X
-
Re: Anyone tried or got the Aixun T3A with the T245 pen?
damn, i forgot about that - i should have got one on the 11:11 sale
not that i wasnt blowing cash though,
ordered this because it blows away a logic probe and is tiny.
https://www.aliexpress.com/item/1005001969702720.html
and this - just because
https://www.aliexpress.com/item/1005003028392011.html
Comment
-
Re: Anyone tried or got the Aixun T3A with the T245 pen?
stj, you still did pretty darn good with those items. I didn't even know about that Radtel. Dang! Yep, I picked up that Aixun T3A on that sale and I've got me two Shelly plus one's. One of them is going into my air exchanger
https://www.aliexpress.com/item/1005...d=TGZAHBIOM2Cd
https://www.shelly.cloud/en/products/shop/shelly-plus-1Last edited by CapLeaker; 12-04-2022, 06:06 PM.
Comment
-
Re: Anyone tried or got the Aixun T3A with the T245 pen?
I guess that depends on what I am going to control with the Shelly. The one that goes on my air exchanger, probably not. I just want it to run on a schedule. The second one I am going to play with for a while. This one I am going to at least try Tasmota and see how that goes.
Comment
-
Re: Anyone tried or got the Aixun T3A with the T245 pen?
Finally my Aixun T3A arrived. Pretty impressive little thing for its size and heats up in 3 seconds flat. Haven’t used it on any serious soldering job yet, but on all the things I used it it on so far it worked really good. If there is anything bad I can say about it so far is putting the foam on the T3A handle.
Comment
-
Re: Anyone tried or got the Aixun T3A with the T245 pen?
well, the radtel is surprisingly good - and very compact!
but the charger is a joke and it's psu - lets just say hell-no!
psu is well built but the transformer is 12mm square - no way i'm trusting the seperation/isolation on that!
the charger base uses descrete current limiting and has a voltage reference and comparater to control the led colour!!
it's also only 400mA so slow as fuck.
i already stripped the board and added a TP5100 module for controlled 1A charging
Comment
-
Re: Anyone tried or got the Aixun T3A with the T245 pen?
radio is fine
https://chirp.danplanet.com/attachments/7910
https://chirp.danplanet.com/attachments/7911
https://chirp.danplanet.com/attachments/7750
https://chirp.danplanet.com/attachments/7912
Comment
Comment