Vizio E550I-B2E

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Super360
    Badcaps Veteran
    • Jul 2016
    • 243
    • United States
    #1

    Vizio E550I-B2E

    Hi everyone I have a set here that wont turn on at all. It has a white standby light but when you press power it acts like it wants to turn on by the light going off but nothing. You guys have any suggestions a tested the led strip with a led tester all is good there. So Now I'm wondering if its the psu, mainboard or tcon? thanks guys. I will upload pics of anything you guys want no problem.
    Attached Files
    Tags: None
    • lotas
      Badcaps Legend
      • Jan 2016
      • 4479
      • Russia
      #2
      Re: Vizio E550I-B2E

      Most likely the same problem, to solder the plug
      https://www.youtube.com/watch?v=paeXXLvQhCk
      https://www.youtube.com/watch?v=6u315asn_OA

        Comment

        • Super360
          Badcaps Veteran
          • Jul 2016
          • 243
          • United States
          #3
          Re: Vizio E550I-B2E

          Yes its funny I took out the boards to find the connector was completely loose omg problem fixed thank you. That was my issue not often in tv repair is it this easy and free. thanks guys.

            Comment

            • lotas
              Badcaps Legend
              • Jan 2016
              • 4479
              • Russia
              #4
              Re: Vizio E550I-B2E

              Yes, along the way, this is their typical malfunction.

                Comment

                • handsworth
                  Senior Member
                  • Oct 2015
                  • 174
                  • United States
                  #5
                  Re: Vizio E550I-B2E

                  Easy Peezy, I've found or bought many of these for pennies and fixed for nothing. Glad you fixed it.

                    Comment

                    • Super360
                      Badcaps Veteran
                      • Jul 2016
                      • 243
                      • United States
                      #6
                      Re: Vizio E550I-B2E

                      Good way to make some extra money for sure thanks guys.

                        Comment

                        • ajshoe
                          ajshoe
                          • Dec 2012
                          • 477
                          • usa
                          #7
                          Re: Vizio E550I-B2E

                          just found one of these on curb. WOW - what an easy fix. So what makes the connector solder joints go bad ? Is there a way to make sure this doesn't happen again ? Obviously this board was made CHEAP. horrible soldering on connector and rest of board.

                            Comment

                            • Super360
                              Badcaps Veteran
                              • Jul 2016
                              • 243
                              • United States
                              #8
                              Re: Vizio E550I-B2E

                              I took out both boards and resoldered both the male and female connectors probably bout 8 through hole on each connector just resolder the entire both connectors with FLUX AND GOOD LEAD SOLDER. finish with ipa alcohol cleaning tooth brush. Tighten all the ground screws in tv as well

                                Comment

                                • ajshoe
                                  ajshoe
                                  • Dec 2012
                                  • 477
                                  • usa
                                  #9
                                  Re: Vizio E550I-B2E

                                  did all those things and soldered xformer pins also. curious why connector pins go bad.

                                    Comment

                                    • diif
                                      Badcaps Legend
                                      • Feb 2014
                                      • 6978
                                      • England
                                      #10
                                      Re: Vizio E550I-B2E

                                      Originally posted by ajshoe
                                      did all those things and soldered xformer pins also. curious why connector pins go bad.
                                      The design of the connector and lead free solder along with thermal expansion and contraction.
                                      Did you remove all of the old solder or just added new leaded?

                                        Comment

                                        • ajshoe
                                          ajshoe
                                          • Dec 2012
                                          • 477
                                          • usa
                                          #11
                                          Re: Vizio E550I-B2E

                                          added leaded solder. I should have removed the lead-free solder. I did touch up all the connectors and xformer. Its an easy access - probably have to do it again. seems like connection between boards should have been a short cable

                                            Comment

                                            Previous template Next

                                            Related Topics

                                            Collapse
                                            • x_orange90_x
                                              Vizio E550i-A0 no power, no standby light
                                              by x_orange90_x
                                              I have a Vizio E550i-A0 that will not power on. It also does not display the standby light in the corner. I disconnected the main board cable to see if the backlights would light but they did not (maybe this is normal for this set?). I checked the voltages on the plug and they all read in mV or 0, so there's no voltage there. The fuses are ok, and the voltages of the 450v caps read about 160v. I see no visual damage on either the power supply or main board. I have read online that the main board is usually the culprit in this model, but not getting backlights with the main disconnected makes me...
                                              11-20-2023, 09:49 AM
                                            • p-top
                                              Vizio, E60u-D3, no standby light, no ps_on
                                              by p-top
                                              Have vizio E60u-D3. No standby light. Have searched and read all D??u-D3 posts. posts with same symtoms fixed by new power supply, one guy needed back lights also.
                                              main boards are kinda spendy and, out of stock alot of places. i would like to fix my board.

                                              PS voltages

                                              1 VSNS -2mV
                                              2-5 LED-OUT -2mV
                                              6-10 GND -2mV
                                              11 +16VS 16.29V
                                              12 AC-DET 3.929V
                                              13PS-ON -3mV
                                              14 +16VS 16.29V
                                              15 +16VS 16.29V...
                                              11-27-2023, 10:44 AM
                                            • sam_sam_sam
                                              Lithonia Lighting versus Light of America Compact Fluorescent product quality
                                              by sam_sam_sam
                                              I have a Lithonia Lighting 65-Watt Gray Hardwired Compact Fluorescent

                                              I also have back when Light of America had these light bulbs available for yard lights

                                              The issue with Light of America was the blast boards had all most certain board failure while bulbs hardly ever fail

                                              While the Lithonia lighting fixture has all most certain bulb failure

                                              So I have modified the Lithonia lighting fixture to accept the Light of America light bulb and see how long this will last

                                              I have only had this light fixture for not more than a year if it...
                                              07-02-2023, 03:45 PM
                                            • Document Archive
                                              LG Gram Ultra-light Weight Notebook Specification for Upgrade or Repair
                                              by Document Archive
                                              This specification for the LG Gram Ultra-light Weight Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Ultra-light Weight boardview and Ultra-light Weight schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
                                              09-07-2024, 03:40 AM
                                            • Document Archive
                                              LG Gram Ultra-Light Laptop Notebook Specification for Upgrade or Repair
                                              by Document Archive
                                              This specification for the LG Gram Ultra-Light Laptop Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Ultra-Light Laptop boardview and Ultra-Light Laptop schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
                                              09-06-2024, 09:10 PM
                                            • Loading...
                                            • No more items.
                                            Working...