I have this monitor, it doesnt power up.
The voltage on the connector CN902 is only 4,5V instead of 19V.
With a quick test I see the voltage on pin 6 of transformer T902 is going crazy from 150 to 250V (tested in DC mode).
Diodes and Q901 seem ok. Any suggestions?
The voltage on the connector CN902 is only 4,5V instead of 19V.
With a quick test I see the voltage on pin 6 of transformer T902 is going crazy from 150 to 250V (tested in DC mode).
Diodes and Q901 seem ok. Any suggestions?
Comment