View Single Post
Old 10-27-2020, 12:34 PM   #43
Badcaps Veteran
budm's Avatar
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 39,200
Default Re: Tefal GV8962 Pro Express steam iron - no power

Originally Posted by beetle1303 View Post
Yes, D3 no longer show 30ohm. It shows 532ohm in resistance mode, and 579 in diode mode.

C2 shows 0.1v and U1 shows 0.2v between Drain pin and each of all other pins.

Pressing the BP5 Power on/off button has no effect..
You are not getting Voltage feeding the D pin of the IC, you need to check the Voltage between the two legs of main filter cap C4 (Green cap next to the resistor) first and also check your soldering works.
BTW, 100 Ohms is too high for that fusible resistor, but of testing purpose t is OK for now.
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.

Voltage Regulator (LDO) testing:

Inverter testing using old CFL:

Tear down pictures : Hit the ">" Show Albums and stories" on the left side

TV Factory reset codes listing:
budm is offline   Reply With Quote