View Single Post
Old 02-21-2020, 09:31 AM   #4
New Member
Join Date: Nov 2016
City & State: BC
My Country: Canada
I'm a: Knowledge Seeker
Posts: 13
Default Re: LG 43UK6300 - Audio & Backlight, but no Video

Originally Posted by budm View Post
I would remove that Transistor and then check the resistance between Ground against all 3 empty pads of that Transistor to see if any one of them shows <50 Ohms.
If not then put the cables between the main board and the LCD panel back in place and recheck the resistance again to see what it shows on all 3 pads.
We want to make it is not short circuit in the LCD panel that causes the Transistor to burnt out.
So i took some measurements with panel cables disconnected to ground and am getting 30 KOhm, 50 KOhm and 80 Ohms on the emitter (leg by the R1104). With the panel cables hooked up, there isn't much change.
arbitarytwist is offline   Reply With Quote