Badcaps Forums - View Single Post - JVC TV Model LT-65N675- No picture

**angelos** · 09-30-2021, 11:33 PM

I measured some voltage points and these are the results

VONE = 0V
STV2 = 0V
VIN_1.2V = 1.23V
VL = 0V
UL = 0V
LL = 0V
VH = 0V

The pico fuse has 12V on both sides
The big chip in the centre reaches 50 degree celsius in 2 minutes.
All these voltages were taken with both panel ribbons disconnected.
I measured resistances on all SMD caps and could not find any shorted ones.
This board is unavailable and on the web i find this board but it is for a Sony TV. I doubt the software will be the same and thus i will not order it.

I guess this tv is going to the landfill.

09-30-2021, 11:33 PM	#4
angelos Badcaps Veteran Join Date: Dec 2012 City & State: Free State My Country: South Africa Line Voltage: 220V AC I'm a: Professional Tech Posts: 343	Re: JVC TV Model LT-65N675- No picture I measured some voltage points and these are the results VONE = 0V STV2 = 0V VIN_1.2V = 1.23V VL = 0V UL = 0V LL = 0V VH = 0V The pico fuse has 12V on both sides The big chip in the centre reaches 50 degree celsius in 2 minutes. All these voltages were taken with both panel ribbons disconnected. I measured resistances on all SMD caps and could not find any shorted ones. This board is unavailable and on the web i find this board but it is for a Sony TV. I doubt the software will be the same and thus i will not order it. I guess this tv is going to the landfill.