Badcaps Forums - View Single Post - Dead but clicking Hanns-G HC194D?

Mafi · 10-15-2021, 10:20 PM

Sorry I should have clarified. I had the PS board by itself when I plugged it in. It was not connected to anything when I took the voltage readings on the connectors. I will desolder one side of each of the 4 jumpers and see what I get. Yes it does have built in speakers but since it wasn't connected that should rule out the video/logic board right? Thanks again for all the guidance.

10-15-2021, 10:20 PM	#8
Mafi New Member Join Date: Sep 2021 City & State: Minneapolis MN My Country: USA Line Voltage: 120VAC 60Hz I'm a: Knowledge Seeker Posts: 12	Re: Dead but clicking Hanns-G HC194D? Sorry I should have clarified. I had the PS board by itself when I plugged it in. It was not connected to anything when I took the voltage readings on the connectors. I will desolder one side of each of the 4 jumpers and see what I get. Yes it does have built in speakers but since it wasn't connected that should rule out the video/logic board right? Thanks again for all the guidance.