View Single Post
Old 12-22-2019, 11:32 AM   #13
jasko_jacker
Badcaps Veteran
 
Join Date: Oct 2014
City & State: roma
My Country: italy
Line Voltage: 220 V
I'm a: Knowledge Seeker
Posts: 934
Default Re: Dell INSPIRION 15 7567 BSOD

I have traced the component under check and after cleaning the card the previous values are wrong.
(LA-D991P schematic is unvailable)
The burnerd inductor receives the 19V and sends it to a double mosfet (siz980dt). This mosfet is driven by an ampec (APW8828).
I expected a short on S1 / D2 but the Ohm value is high (G1 and G2 -> 0V with motherboard ON).
What I would like to understand is if the circuit of this board page 73 LA-D751P schematic is similar. (it seems that on the alienware LA-D751P both the ram and the GPU are powered by the same 1.35VS_VGAP-> 1.35VS_VGA line but I could be wrong)
However it seems that PL901 is the voltage for VRAM.
Following the track that goes under one of the ram and which has an Ohm value of 0.50 compared to PL901 (therefore they are connected) I do not detect any short compared to GND. I don't know if it is appropriate to inject the 1.35V on PL901.
Attached Images
File Type: jpg LA_D993P_GPU_VRAM_1.jpg (518.3 KB, 143 views)
Attached Files
File Type: pdf LA-D751P Rev 1.0.pdf (3.15 MB, 113 views)

Last edited by jasko_jacker; 12-22-2019 at 11:41 AM..
jasko_jacker is offline   Reply With Quote