MSI GTX1070 not recognized on H110 Board, Z490 OK

DynaxSC

Badcaps Veteran

Join Date: Apr 2021

Posts: 452

Country: Poland
#1

MSI GTX1070 not recognized on H110 Board, Z490 OK

01-26-2022, 04:52 PM

Hi,

I have an MSI GTX1070 GAMING X card, which I buyed and repaired. It got wet with something and corroded slightly in an limited area. There were a few resistors and caps around the VRM Controller, which were corroded, and had to be replaced, traces to be tinned, corrosion to be removed. Sof far so good, the card is recognized in BIOS and works perfectly on a modern Z490 board. But when I put the card into a H110 board (tried different) then it is not recognized by the BIOS, and does not show up neither in Windows nor in Mods. Tried all possible Bios settings, updated mobo Bios, to no avail. Very strange

The area where the board has correded due to some electrolysis effect is quite limited (ca 4 X 6 cm) near the 1V8 buck controller and far away from the PCI connector, GPU, and all the PCI logic. Etherything only on the top side no more then 1-5 cm from the edge farest away from the VGA connectors. It may be possible that I have not identified some corroded resistor (no conduction possible as resistor pads were totally ethed on the other ones) that give some signal necessary to detect the card on older boards.

I have no clue what could be the reason. Any hints appreciated.

Last edited by DynaxSC; 01-26-2022, 04:59 PM.
Tags: None
DrasticRepairs

Member

Join Date: May 2021

Posts: 23

Country: United States
#2

01-28-2022, 02:55 AM

Re: MSI GTX1070 not recognized on H110 Board, Z490 OK

Could be pcie capacitors. Not sure what else.
Comment
Agent24

I see dead caps

Join Date: Oct 2007

Posts: 4946

Country: New Zealand
#3

01-28-2022, 03:43 AM

Re: MSI GTX1070 not recognized on H110 Board, Z490 OK

Could it be that the card is fine but just incompatible with the other board?

"Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
-David VanHorn
Comment

Previous template Next

Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?

by Tynan Dill

I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

Upon bringing it home and plugging it up, it showed a standby light.

I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

The screen seems to blackout and stay black, but with a flashlight I can see the display.

With my Playstation 4 connected via HDMI, and running a game I can hear sound.

Assuming...

7 Photos
- Channel: Troubleshooting TVs and Video Sources
11-22-2024, 01:46 PM
HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen

by m1ch43lzm

Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
05-12-2025, 08:37 PM
ASUS STRIX Z490-F GAMING - No POST, stubborn board

by DynaxSC

Hi,

I have this very stubborn ASUS mobo on the bench, and I already face the wall with it. It just refuses to POST, although everything seems to be OK.

The situation looks like this:

After connecting the board to the power supply on Nuvoton (SLP_S3#, pin 64), the Low signal (50 ohm resistance) appears immediately. PWRNTN# signal goes through Nuvoton to the chipset (confirmed after removing the chipset). The following conditions are then met for the chipset to generate the SLP_S3# signal:

1. RTC oscillates normally (32.768KHz).
...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
07-08-2022, 05:45 AM
PS5 Disc Not Supported/ Disc Not Recognized Board Num: EDM-020

by Junior††

Good Afternoon fellas,

Issue:
Disc is showing as not supported when a disc is put in.

Here's what I've done, you can skip this if you just wanna know the question:
- replaced with a disc drive from a donor ps5 (honestly questionable if this is known to work)
- reflowed the disc drive connector
-reflowed the chip in question (shown on image)
- I will say this console was very dusty so it's conceivable that it got so hot that it made the chip joints cold and potentially other things on the board

Question:
I...
- Channel: Troubleshooting Game Consoles & Other Weird Devices
02-19-2025, 12:48 PM
Board view and schematics for MSI Mag z490 tomahawk board

by pavski

The MSI Mag z490 tomahawk board is not responding to pressing the switch button. There is voltage supplied to BIOS and superio but I would like to trace it. Perhaps somebody could share board view and schematics? Thank you....
- Channel: BIOS & Schematic Requests!
06-01-2024, 12:49 PM
Loading...
No more items.

MSI GTX1070 not recognized on H110 Board, Z490 OK

MSI GTX1070 not recognized on H110 Board, Z490 OK

Comment

Comment

Related Topics