View Single Post
Old 06-05-2020, 01:22 AM   #14
RukyCon
A Fake Rubycon
 
RukyCon's Avatar
 
Join Date: Jan 2017
City & State: The Peoples Republic of California
My Country: USA
Line Voltage: 122.5VAC 59.9Hz
I'm a: Knowledge Seeker
Posts: 676
Default Re: QW-MS3010D 30V 10A Variable PSU Blown MOSFET

Quote:
Originally Posted by R_J View Post
R2 and R5 are likely 47Ω, they should be the same value. Check the voltage before Q2 (p75nf75), the output of the dual diode (STTH1602CT) or across C11,16 or 22
Tested, and it's roughly 500mV, or roughly the same voltage as i was able to get on the output with both IRF840's replaced (see post #9 for more info).
RukyCon is offline   Reply With Quote