View Single Post
Old 09-09-2021, 08:58 AM   #1
bord
New Member
 
Join Date: Feb 2014
City & State: WM
My Country: South East Asia
I'm a: Knowledge Seeker
Posts: 14
Default quecoo t12-952 Recap psu help needed

Got a soldering station with an internal psu (mains to 24V) which need to be recapped because the caps are all the dodgy "Yungli" brand with no series markings.
The biggest cap at the bottom of the pic looks like a bulk cap (400V 33uF), the 2 caps at the top (35V 680uF), a small one just next to a heatsink on the left (50V 22uF), the 33uF and 680uF caps are marked with "low esr".

Problem is that I can't get any low esr series cap in stock to replace the 400V 33uF from the local Farnell, only general purpose series available. The only option which seems to have lowish esr is the Chemicon GXF.


My question are :-
- does the 400V cap look like a psu bulk cap and is a low esr series cap necessary to replace it. Or can I use general purpose caps like Panasonic ED/EE/NHG, Rubycon BXC/PX/PK/TRW, Chemicon KXG/KMG/GXF etc?
- all the caps including the bulk cap are normal polar (DC) caps right?
Attached Images
File Type: jpg zt121.jpg (91.1 KB, 19 views)

Last edited by bord; 09-09-2021 at 09:01 AM..
bord is offline   Reply With Quote