View Single Post
Old 09-09-2021, 07:39 PM   #4
bord
New Member
 
Join Date: Feb 2014
City & State: WM
My Country: South East Asia
I'm a: Knowledge Seeker
Posts: 14
Default Re: Recap psu help needed

Quote:
Originally Posted by stj View Post
the 400v cap does not need to be low esr because the mains coming in is only 50/60Hz x2
the 680uf caps sound small, if you can fit them in the case then consider 1000uf panasonic FS series.

if this is what i think it is then do a search on this forum - the big cap is tricky because of limited case height.
Is that the same with newer PC psu's (which are LLC, DC-DC) as well - no need for low esr for the big bulk cap?

There is still quite abit of space for height on the 680uf caps but not diameter. The big cap still has space for height and looks smaller compared to the silkscreen marking.
bord is offline   Reply With Quote