Badcaps Forums - View Single Post - Panasonic TC-P65ST50 plasma in protection mode after incident

**Biruslapio** · 04-28-2022, 10:34 AM

Only the SS board is defective, lucky.
You should use an AE variant then, the others will require some changes in component placing.
The screws repair is done by swapping them with screws of proper length with washers, cleaning the ground pads on the boards and on the TV metal frame itself, look at this blog post for more information https://alpengeist-tvrepair.blogspot...d-7-blink.html

04-28-2022, 10:34 AM	#9
Biruslapio Badcaps Veteran Join Date: Nov 2013 City & State: ST My Country: Brasil Line Voltage: 220V 60Hz I'm a: Student Tech Posts: 368	Re: Panasonic TC-P65ST50 plasma in protection mode after incident Only the SS board is defective, lucky. You should use an AE variant then, the others will require some changes in component placing. The screws repair is done by swapping them with screws of proper length with washers, cleaning the ground pads on the boards and on the TV metal frame itself, look at this blog post for more information https://alpengeist-tvrepair.blogspot...d-7-blink.html Last edited by Biruslapio; 04-28-2022 at 10:38 AM..