Badcaps Forums - View Single Post - Panasonic TC-P65ST50 plasma in protection mode after incident

HonkBeep04 · 05-05-2022, 12:58 AM

The SS board arrived today. I installed it and all is going well. I also ordered one of the official Panasonic part number screw packs, but when I got them they were way longer then the existing ones. I didn't want to take the chance on breaking the panel, so I put in the old screws. The new board has very little buzzing so I'm pretty sure it was actually caused by the coils going bad, which is another common failure for these TVs later on.

Thanks so much again for your help. You really saved me a big headache!

05-05-2022, 12:58 AM	#17
HonkBeep04 New Member Join Date: Apr 2022 City & State: La Verkin, Utah My Country: United States I'm a: Knowledge Seeker Posts: 7	Re: Panasonic TC-P65ST50 plasma in protection mode after incident The SS board arrived today. I installed it and all is going well. I also ordered one of the official Panasonic part number screw packs, but when I got them they were way longer then the existing ones. I didn't want to take the chance on breaking the panel, so I put in the old screws. The new board has very little buzzing so I'm pretty sure it was actually caused by the coils going bad, which is another common failure for these TVs later on. Thanks so much again for your help. You really saved me a big headache!