View Single Post
Old 06-17-2019, 12:31 AM   #9
Join Date: May 2016
City & State: San Jose, Ca
My Country: usa
I'm a: Knowledge Seeker
Posts: 38
Default Re: samsung un60j620dafxza backlight led smd diode

Originally Posted by neilc6 View Post
The other issue is that the lenses have to sit perfectly both centered and height. Slightly off will create bright spots. A couple may not be too noticeable but if all the LEDs are off it's going to look terrible.
Yes, I already anticipated that and have worked out the details. Ok so I know it will be hard and I thank you for your suggestion but I want to attempt it. I did take a laser measurements and found 43 thousands height over the led to the lens. I then made a shim that sits on top of the let as the lens is placed. after it sets with optically clear super glue I remove the shim and it's good. My testing shows variance but no different then what the stock lens are showing from OEM production. I'm confident this will not be an issue.
I just need the data on the best to get.
ca2014mp2 is offline   Reply With Quote