This TV was Brought to me in non working condition. There are no power\standby lights on the set at all. Here is what I have done so far.
1. Took back off of the tv and tested that the system was getting AC voltage at the plug.
2. Tested the fuse on the power board.
3. Tested the DC voltage at the Large Capacitor.(170Vdc)
4. Checked for any obvious burn marks bad solder joints.
5. Unplugged various devices from the main board.(Tcon, Wi-fi module,)
I'm not getting any response from the set at all. When I measure voltage between the Main Board and the Power Board I am only seeing between .1-.23 vdc on some of the pins. That seems low to me.
Any Ideas? Thanks in Advance.
1. Took back off of the tv and tested that the system was getting AC voltage at the plug.
2. Tested the fuse on the power board.
3. Tested the DC voltage at the Large Capacitor.(170Vdc)
4. Checked for any obvious burn marks bad solder joints.
5. Unplugged various devices from the main board.(Tcon, Wi-fi module,)
I'm not getting any response from the set at all. When I measure voltage between the Main Board and the Power Board I am only seeing between .1-.23 vdc on some of the pins. That seems low to me.
Any Ideas? Thanks in Advance.
Comment