Announcement

Collapse
No announcement yet.

Trouble ID’ing C3 Cap.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Trouble ID’ing C3 Cap.

    This is a Jenn Air stove model # JMW8527 AAW. NO clock or temp. light.
    Disassembled and can see burn spot on one leg of the C3 cap. at the board hole. There is a resistor on that leg also. Only markings on the cap are: RGA105C and H245M. Can't seem to I'D as to the it's capacitance or voltage in order to order a new one. Any help would be greatly appreciated.

    #2
    Re: Trouble ID'ing C3 Cap.

    Could be the Lelon RGA series.

    RGA = series
    105C = temp rating
    H245 = ?
    M = 20% tolerance

    Other Lelon RGA show things like H136 and H736.

    Comment


      #3
      Re: Trouble ID'ing C3 Cap.

      Do you know the dimensions and lead pitch?

      Comment


        #4
        Re: Trouble ID'ing C3 Cap.

        Here's the part number scheme I found. Doesn't seem to tell you anything.
        Attached Files

        Comment


          #5
          Re: Trouble ID'ing C3 Cap.

          Post a picture, I suspect the value is marked on the other side of the capacitor, similar to this one.
          Attached Files
          Last edited by R_J; 10-02-2021, 11:18 AM.

          Comment


            #6
            Re: Trouble ID'ing C3 Cap.

            Thanks everyone. This gives me some guidance. I haven’t de soldered and removed the unit yet. As suggested, it may be labeled on the side I can’t see as it’s mounted horizontally and only exposes the upper top portion. I failed to mention, it is a Lelon. Many thanks again.
            Last edited by Tommlynn49; 10-02-2021, 02:50 PM. Reason: Punctuation correction

            Comment

            Working...
            X