Synology DS418play need to locate a tps65094 replacement

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ligym60
    Member
    • Oct 2016
    • 39
    • United States
    #1

    Synology DS418play need to locate a tps65094 replacement

    Hi I recieved a synology disk station yesterday with a no power fault. Witty shorts on multiple power rails. After dividing the power rails. I've narrowed it down to this tps65094 chip having dead shorts on buck converter 2, 3, 4. After lifting the chip from the board all shorts vanish. Testing the chip itself it has shorts on these rails. Mouser has a 52 week lead time and digikey has 0 in stock. Does anyone on here have a distributor that offers them ? Some have stock but only sell a minimum of 2000pcs :/ I would like to purchase 2-4pcs

    Thanks everyone for your continued support.
    Last edited by SMDFlea; 06-05-2021, 11:27 AM. Reason: Synology DS418play
    Tags: None
    • ligym60
      Member
      • Oct 2016
      • 39
      • United States
      #2
      Re: Good morning everyone in need to locate a tps65094 replacement

      Here is a edited version of data sheet with highlighted faults if it helps anyone
      Attached Files

        Comment

        • ligym60
          Member
          • Oct 2016
          • 39
          • United States
          #3
          Re: Good morning everyone in need to locate a tps65094 replacement

          No worries
          Found a supplier that will send me 2 of these
          Thanks everyone

            Comment

            Previous template Next

            Related Topics

            Collapse
            • KYBOSH
              Samsung UN55HU8550F - No picture, No sound
              by KYBOSH
              Previous owner says this unit powers on and sometime has an image and sometimes not. They attempted to replace the main board but with no success.

              TV came with the replacement mainboard as well as the original.

              When the TV turns on there is no image or sound. No response to the remote or toggle button other than the power button. The power supply's relay was clipping here and there. It did that for several seconds even after I removed the mains. I did this even with no other boards connected (only the backlight was connected at the time). Backlight looks fine but...
              01-09-2023, 02:36 PM
            • skwarszczow
              Macbook Pro A2141 020-01700-A GPU Artifacts then no S5 rails
              by skwarszczow
              Hello everyone,

              This is my first post on the forum

              I recently purchased a MacBook A2141 from a colleague at work, which had issues with the dedicated GPU. The system occasionally displayed artifacts on the screen and sometimes experienced kernel panics related to the GPU. Interestingly, applying pressure to the VRAM module would temporarily resolve the artifact issues, which made me optimistic about the ease of repair.

              Board: 020-01700, Config: Intel i7, 512GB SSD, 16GB Ram.



              Before completing the purchase, we decided to erase...
              03-23-2025, 06:04 PM
            • SarcasticOP
              General question about MacBook power rails for repair.
              by SarcasticOP
              I am looking at an A2337 and found this for the order of power rails and what they do. Can this be confirmed before I dive into hunting down power rails that do not exist or are not neccisary?
              • PPBUS_G3H (12.6V-12.8V)
                • This is the main power rail that supplies power to the entire system. Check this rail first, as it must be present for other power rails to work.
              • PP3V42_G3H (3.42V)
                • This power rail is derived from PPBUS_G3H and is used to power the SMC (System Management Controller) and other essential circuits. It should be present if PPBUS_G3H is working correctly.
              • PPVRTC_G3H (3.3V)
                • This
              ...
              12-12-2024, 05:50 PM
            • the_rem
              Unknown transformer : how to find a good replacement part ?
              by the_rem
              Hello guys,

              I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.

              I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
              VEF20FB07BW(2025001A)20110927.pdf
              https://drive.google.com
              04-23-2025, 01:48 AM
            • ezenia
              PS4 controller left stick potentiometer replacement issue
              by ezenia
              Hello,

              Not sure if this is the correct section, but I have a PS4 controller that I am trying to fix. It developed stick drift on the left stick and the usual simpler methods did not fix the problem.

              So I went on eBay and ordered some replacement potentiometers. https://www.ebay.co.uk/itm/174967976757 is where I got them from.

              I took the green potentiometers off the replacement sticks and soldered them onto the PCB. Assembled the controller and ran some tests. The drifting was somewhat fixed (not fully in center, but way better than before). However,...
              09-30-2023, 02:19 PM
            • Loading...
            • No more items.
            Working...