Announcement

Collapse
No announcement yet.

X555ld rev 3.3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: X555ld rev 3.3

    Originally posted by SMDFlea View Post
    see posts 15 and 17 .The bios at post 17 has your DMI + win key added .

    Use neoprogrammer or asprogrammer software

    https://www.badcaps.net/forum/showpo...04&postcount=7 NeoProgrammer

    https://www.badcaps.net/forum/showpo...6&postcount=10 AsProgrammer
    Thanks neoprogrammer is good list my chip mx25l6473e.Can I write the bios file directly? or do I need to find a dump file.i found a x555lb orijinal dump file Which one should I use
    3.3 volt mode mandatory?
    Attached Files
    Last edited by hallmark1730; 04-09-2021, 06:06 AM.

    Comment


      #22
      Re: X555ld rev 3.3

      i try programing but error this
      Protection may be enabled. Press "Unprotect" and check datasheet
      Current programmer: CH341
      Old SREG: 01000000(0x40),
      New SREG: 11111111(0xFF),
      Programming memory(verifying)...
      Verification error on address: 00000005
      Execution time: 00:00:00.048
      Current programmer: CH341
      SPI ID: 2017C2
      Current programmer: CH341
      15:07:18
      Protection may be enabled. Press "Unprotect" and check datasheet
      Current programmer: CH341
      Old SREG: 11110011(0xF3),
      New SREG: 01000000(0x40),
      Programming memory(verifying)...
      Verification error on address: 0000000E
      Execution time: 00:00:00.049

      Comment


        #23
        Re: X555ld rev 3.3

        Use the bios at post #17 ,i told you i added your DMI (serial number etc) and win key to it. Change neoprogrammer hardware settings to use ch341a . Manually choose the mx25l6473e ,then erase the chip,then open the file from post #17 and program
        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment


          #24
          Re: X555ld rev 3.3

          I did the way you say. But I get the same error. please help me
          Attached Files

          Comment


            #25
            Re: X555ld rev 3.3

            plug the charger in,and the laptop off and try again
            All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

            Comment


              #26
              Re: X555ld rev 3.3

              if plug the charger do not read or write add picture.
              Even when I disconnect the usb, the light is on the programmer

              NEW EDİT:I don't know why, but now he programed it. Windows is opening, I will check if my video card problem is fixed
              Attached Files
              Last edited by hallmark1730; 04-09-2021, 07:15 AM.

              Comment


                #27
                Re: X555ld rev 3.3

                You are a best.Thank you very very much.you were very patient, kind and helpful

                Comment


                  #28
                  Re: X555ld rev 3.3

                  I'm very sorry. The graphics card is working properly.I wanted to do a clean install because the pc is slowing down after bios reprogramed.but windows installation stuck at copying windows files 0%.try different usb-iso-diskpart-bios secure boot disabled but dont work.I can't clean install

                  Comment


                    #29
                    Re: X555ld rev 3.3

                    ok i solved it clean a contack cleaner for motherboard and harddisk board connector its work

                    Comment


                      #30
                      Re: X555ld rev 3.3

                      Originally posted by SMDFlea View Post
                      Try the attached bios,flash with AFUwin from here - https://www.ami.com/download/aptio-v...pdate-utility/
                      Thanks a lot 4 this correct bios for gt 940m. Code 43 error disappeared now. I change win key to blank and write the original case serial number to this bios.
                      Everything is perfect.

                      Comment


                        #31
                        asus x555ld slow boot

                        hi
                        i have x555ld rev3.3

                        This device was programmed before it reached me and it has this problem. I tried a some BIOS now, but it is slow. It even shows the clean me file in the attachment.
                        I tested 3 or 4 BIOS, but it still shows up late
                        me BIOS version tested:
                        Version: 10.0.38.1000
                        Version: 10.0.30.1072
                        pls help me
                        tnx
                        Attached Files
                        Last edited by khelane; 08-01-2021, 07:51 AM.

                        Comment


                          #32
                          Re: asus x555ld slow boot

                          Post a picture of the sticker on the motherboard

                          Example https://i.postimg.cc/hP69RBW0/aaa.jpg

                          https://www.badcaps.net/forum/showthread.php?t=96604
                          All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                          Comment


                            #33
                            Re: asus x555ld slow boot

                            It was my own fault. I had to clean the bios file myself. Instead, I went and downloaded the cleaned bios file. Finally, I made the BIOS with the appropriate me file and it was over
                            I attached the file for the site, maybe it was useful for someone

                            Thanks
                            Attached Files

                            Comment


                              #34
                              Re: asus x555ld slow boot

                              Originally posted by SMDFlea View Post
                              My laptop is slowly boot. Please help. Thanks all. My model is (334) x555ldb.
                              https://i.postimg.cc/sgYdVzTW/P-20230301-192806.jpg

                              Comment

                              Working...
                              X